Hi,
On Sun, Sep 17, 2017 at 05:19:47AM +0200, Stefan Brüns wrote:
> The H83T uses a compatible string different from the A23, but requires
> the same clock autogating register setting.
>
> The H3 also requires setting the clock autogating register, but has
> the register at a different offset.
>
> Add three suitable callbacks for the existing controller generations
> and set it in the controller config structure.
>
> Signed-off-by: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
> ---
> drivers/dma/sun6i-dma.c | 31 ++++++++++++++++++++++++++-----
> 1 file changed, 26 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index bcd496edc70f..45bcd5271d94 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -48,6 +48,9 @@
> #define SUN8I_DMA_GATE 0x20
> #define SUN8I_DMA_GATE_ENABLE 0x4
>
> +#define SUNXI_H3_SECURE_REG 0x20
> +#define SUNXI_H3_DMA_GATE 0x28
> +#define SUNXI_H3_DMA_GATE_ENABLE 0x4
> /*
> * Channels specific registers
> */
> @@ -111,7 +114,7 @@ struct sun6i_dma_config {
> * however these SoCs really have and need this bit, as seen in the
> * BSP kernel source code.
> */
> - bool gate_needed;
> + void (*clock_autogate_enable)();
> };
>
> /*
> @@ -267,6 +270,20 @@ static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
> return addr_width >> 1;
> }
>
> +static void sun6i_enable_clock_autogate_noop(struct sun6i_dma_dev *sdev)
> +{
> +}
I guess instead of that one, we could just test for the pointer and
not call the function if it's NULL?
Looks good otherwise, once fixed, you have
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
