> -----Original Message----- > From: Wood Scott-B07421 > Sent: 2014年1月23日 星期四 8:44 > To: Tang Yuantian-B29983 > Cc: Wood Scott-B07421; galak@xxxxxxxxxxxxxxxxxxx; linuxppc- > dev@xxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Kushwaha Prabhakar- > B32579 > Subject: Re: [PATCH] clk: corenet: Update the clock bindings > > On Tue, 2014-01-21 at 10:02 +0800, Tang Yuantian wrote: > > From: Tang Yuantian <yuantian.tang@xxxxxxxxxxxxx> > > > > Main changs include: > > - Clarified the clock nodes' version number > > - Fixed a issue in example > > > > Singed-off-by: Tang Yuantian <Yuantian.Tang@xxxxxxxxxxxxx> > > --- > > Documentation/devicetree/bindings/clock/corenet-clock.txt | 4 +++- > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt > > b/Documentation/devicetree/bindings/clock/corenet-clock.txt > > index 24711af..d6cadef 100644 > > --- a/Documentation/devicetree/bindings/clock/corenet-clock.txt > > +++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt > > @@ -54,6 +54,8 @@ Required properties: > > It takes parent's clock-frequency as its clock. > > * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0). > > It takes parent's clock-frequency as its clock. > > + Note: v1.0 and v2.0 are clock version which should align to > > + clockgen node's they belong to which is chassis version. > > Instead, how about a note like this near the top of the file: > > All references to "1.0" and "2.0" refer to the QorIQ chassis version to > which the chip complies. > > Chassis Version Example Chips > --------------- ------------- > 1.0 p4080, p5020, p5040 > 2.0 t4240, b4860, t1040 > Better, I will update. > > BTW, this binding and the associated driver really should be called > "qoriq-clock", not "corenet-clock". This would match the compatible > string, and it doesn't really have much to do with corenet (which is part > of the QorIQ chassis v1 and v2, but not *this* part). Do you know if the > chassis v3 clock interface will be similar enough to share a driver? > Doesn't QorIQ include some low-end socs, like p1022, p1020? This driver has nothing to do with these boards. I have no idea about chassis v3. If it has similar clock tree, this driver can be shared. Even the driver can't be used by v3, we can easily add v3 support since it has different Compatible string. Regards, Yuantian > -Scott > ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f