Add properties to describe the reset topology for on-SoC devices:
- Add the "#reset-cells" property to the CPG/MSSR device node,
- Add resets and reset-names properties to the various device nodes.
This allows to reset SoC devices using the Reset Controller API.
Note that resets usually match the corresponding module clocks.
Exceptions are:
- The audio module has resets for the Serial Sound Interfaces only,
- The display module has only a single reset for all DU channels, but
adding reset properties for the display is postponed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/r8a7791.dtsi | 82 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e984b106dd1acd7b..5a8a158470765d89 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -120,6 +120,7 @@
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
@@ -133,6 +134,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
@@ -146,6 +148,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
@@ -159,6 +162,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
@@ -172,6 +176,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
@@ -185,6 +190,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
@@ -198,6 +204,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
@@ -211,6 +218,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
gpio7: gpio@e6055800 {
@@ -224,6 +232,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 904>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 904>;
};
thermal: thermal@e61f0000 {
@@ -234,6 +243,7 @@
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
@@ -253,6 +263,7 @@
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
@@ -273,6 +284,7 @@
clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
@@ -296,6 +308,7 @@
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
@@ -325,6 +338,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -356,6 +370,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -385,6 +400,7 @@
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -414,6 +430,7 @@
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -426,6 +443,7 @@
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -438,6 +456,7 @@
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -451,6 +470,7 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -463,6 +483,7 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -475,6 +496,7 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -487,6 +509,7 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -499,6 +522,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -512,6 +536,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 925>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 925>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -529,6 +554,7 @@
<&dmac1 0x77>, <&dmac1 0x78>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -544,6 +570,7 @@
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
status = "disabled";
};
@@ -559,6 +586,7 @@
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 323>;
status = "disabled";
};
@@ -576,6 +604,7 @@
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -591,6 +620,7 @@
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -604,6 +634,7 @@
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -617,6 +648,7 @@
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -631,6 +663,7 @@
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -645,6 +678,7 @@
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -659,6 +693,7 @@
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -673,6 +708,7 @@
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1106>;
status = "disabled";
};
@@ -687,6 +723,7 @@
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1107>;
status = "disabled";
};
@@ -701,6 +738,7 @@
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1108>;
status = "disabled";
};
@@ -715,6 +753,7 @@
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -729,6 +768,7 @@
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -743,6 +783,7 @@
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 216>;
status = "disabled";
};
@@ -758,6 +799,7 @@
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
status = "disabled";
};
@@ -773,6 +815,7 @@
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 720>;
status = "disabled";
};
@@ -782,6 +825,7 @@
clocks = <&cpg CPG_MOD 901>;
clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 901>;
status = "disabled";
};
@@ -797,6 +841,7 @@
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 719>;
status = "disabled";
};
@@ -812,6 +857,7 @@
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
status = "disabled";
};
@@ -827,6 +873,7 @@
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
status = "disabled";
};
@@ -842,6 +889,7 @@
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
status = "disabled";
};
@@ -857,6 +905,7 @@
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
status = "disabled";
};
@@ -872,6 +921,7 @@
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
status = "disabled";
};
@@ -887,6 +937,7 @@
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
status = "disabled";
};
@@ -914,6 +965,7 @@
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -927,6 +979,7 @@
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -938,6 +991,7 @@
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
status = "disabled";
};
@@ -947,6 +1001,7 @@
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 814>;
status = "disabled";
};
@@ -959,6 +1014,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -974,6 +1030,7 @@
clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
status = "disabled";
usb0: usb-channel@0 {
@@ -992,6 +1049,7 @@
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
status = "disabled";
};
@@ -1001,6 +1059,7 @@
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
status = "disabled";
};
@@ -1010,6 +1069,7 @@
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
status = "disabled";
};
@@ -1019,6 +1079,7 @@
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 131>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 131>;
};
vsp1@fe930000 {
@@ -1027,6 +1088,7 @@
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 128>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 128>;
};
vsp1@fe938000 {
@@ -1035,6 +1097,7 @@
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 127>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 127>;
};
du: display@feb00000 {
@@ -1075,6 +1138,7 @@
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -1086,6 +1150,7 @@
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -1095,6 +1160,7 @@
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 106>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 106>;
};
/* External root clock */
@@ -1163,6 +1229,7 @@
clock-names = "extal", "usb_extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller@e6160000 {
@@ -1190,6 +1257,7 @@
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1206,6 +1274,7 @@
<&dmac1 0x51>, <&dmac1 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1221,6 +1290,7 @@
<&dmac1 0x55>, <&dmac1 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1236,6 +1306,7 @@
<&dmac1 0x41>, <&dmac1 0x42>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 205>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1247,6 +1318,7 @@
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1260,6 +1332,7 @@
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <0 0>;
@@ -1293,6 +1366,7 @@
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
bus-range = <1 1>;
@@ -1341,6 +1415,7 @@
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
status = "disabled";
};
@@ -1445,6 +1520,13 @@
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
