Re: [PATCH 4/8] tty/bcm63xx_uart: allow naming clock in device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Greg,

On 2 August 2017 at 11:34, Jonas Gorski <jonas.gorski@xxxxxxxxx> wrote:
> Codify using a named clock for the refclk of the uart. This makes it
> easier if we might need to add a gating clock (like present on the
> BCM6345).
>
> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>

Could I please get a (N)Ack so Ralf can add this patch to his tree?


Regards
Jonas


> ---
>  Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt | 6 ++++++
>  drivers/tty/serial/bcm63xx_uart.c                              | 6 ++++--
>  2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
> index 5c52e5eef16d..8b2b0460259a 100644
> --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
> +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
> @@ -11,6 +11,11 @@ Required properties:
>  - clocks: Clock driving the hardware; used to figure out the baud rate
>    divisor.
>
> +
> +Optional properties:
> +
> +- clock-names: Should be "refclk".
> +
>  Example:
>
>         uart0: serial@14e00520 {
> @@ -19,6 +24,7 @@ Example:
>                 interrupt-parent = <&periph_intc>;
>                 interrupts = <2>;
>                 clocks = <&periph_clk>;
> +               clock-names = "refclk";
>         };
>
>         clocks {
> diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
> index a2b9376ec861..f227eff28d3a 100644
> --- a/drivers/tty/serial/bcm63xx_uart.c
> +++ b/drivers/tty/serial/bcm63xx_uart.c
> @@ -841,8 +841,10 @@ static int bcm_uart_probe(struct platform_device *pdev)
>         if (!res_irq)
>                 return -ENODEV;
>
> -       clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
> -                                 clk_get(&pdev->dev, "refclk");
> +       clk = clk_get(&pdev->dev, "refclk");
> +       if (IS_ERR(clk) && pdev->dev.of_node)
> +               clk = of_clk_get(pdev->dev.of_node, 0);
> +
>         if (IS_ERR(clk))
>                 return -ENODEV;
>
> --
> 2.13.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux