Hi Laurent,
Thank you for your reply. The problem was already discussed when adding sil8620 driver.
It can be solved later. I'm CC-ing Andrzej Hajda, as he used to discuss it with you.
https://patchwork.freedesktop.org/patch/114224/
https://lists.freedesktop.org/archives/dri-devel/2015-December/096756.html
Regards,
Maciej
On 31/08/17 15:30, Laurent Pinchart wrote:
Hi Maciej,
Thank you for the patch.
On Thursday, 31 August 2017 15:27:13 EEST Maciej Purski wrote:
SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.
This patch is based on the code refactored by Tomasz Stanislawski
<t.stanislaws@xxxxxxxxxxx>, which was initially developed by:
Adam Hampson <ahampson@xxxxxxxxxxxxxxx>
Erik Gilling <konkers@xxxxxxxxxxx>
Shankar Bandal <shankar.b@xxxxxxxxxxx>
Dharam Kumar <dharam.kr@xxxxxxxxxxx>
Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
---
Changes in v2:
- use bulk_requlators instead of single one
- substitute some of the magic values with macros
- improve coding style
- improved error handling in sii9234_probe()
---
.../devicetree/bindings/display/bridge/sii9234.txt | 34 +
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/sii9234.c | 993 ++++++++++++++++++
4 files changed, 1036 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/bridge/sii9234.txt create mode
100644 drivers/gpu/drm/bridge/sii9234.c
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file
mode 100644
index 0000000..3ce7413
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
@@ -0,0 +1,34 @@
+Silicon Image SiI9234 HDMI/MHL bridge bindings
+
+Required properties:
+ - compatible : "sil,sii9234".
+ - reg : I2C address for TPI interface, use 0x39
+ - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
+ - iovcc18-supply : I/O Supply Voltage (1.8V)
+ - avcc12-supply : TMDS Analog Supply Voltage (1.2V)
+ - cvcc12-supply : Digital Core Supply Voltage (1.2V)
+ - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - reset-gpios: gpio specifier of RESET pin (active low)
+ - video interfaces: Device node can contain video interface port
+ node for HDMI encoder according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Doesn't this chip have two ports, one input connected to the SoC and one
output connected to an HDMI connector ? If so there should be two ports in DT
too.
+Example:
+ sii9234@39 {
+ compatible = "sil,sii9234";
+ reg = <0x39>;
+ avcc33-supply = <&vcc33mhl>;
+ iovcc18-supply = <&vcc18mhl>;
+ avcc12-supply = <&vsil12>;
+ cvcc12-supply = <&vsil12>;
+ reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpf3>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
It would be useful to include the remote DT nodes in the example too.
+ };
+ };
+ };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
