> -----Original Message----- > From: Lee Jones [mailto:lee.jones@xxxxxxxxxx] > Sent: Tuesday, September 05, 2017 10:36 AM > To: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > Cc: robh+dt@xxxxxxxxxx; pavel@xxxxxx; devicetree@xxxxxxxxxxxxxxx; > j.anaszewski@xxxxxxxxxxx; rpurdie@xxxxxxxxx; linux-leds@xxxxxxxxxxxxxxx; > jiri@xxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; platform-driver- > x86@xxxxxxxxxxxxxxx > Subject: Re: [patch v4 2/2] mfd: Add Mellanox regmap I2C driver > > On Tue, 29 Aug 2017, Vadim Pasternak wrote: > > > This patch adds I2C regmap driver for Mellanox BMC cards with the > > programmable devices attached to I2C interface. It allows support for > > CPLD devices with one and two bytes address space. > > > > Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > > Acked-by: Pavel Machek <pavel@xxxxxx> > > --- > > MAINTAINERS | 1 + > > drivers/mfd/Kconfig | 13 ++++ > > drivers/mfd/Makefile | 1 + > > drivers/mfd/mlxreg-i2c.c | 183 > > +++++++++++++++++++++++++++++++++++++++++++++++ > > 4 files changed, 198 insertions(+) > > create mode 100644 drivers/mfd/mlxreg-i2c.c > > I don't know what this is, but it is not an MFD driver. Please find somewhere > more appropriate to locate it. MFD is not a dumping ground for drivers > which do not fit anywhere else. Hi Lee, As according your previous notes I am splitting hotplug driver and moving it to new folder drivers/platform/mellanox/, possibly it would be the best place to relocate it there. I also intend to have in the future small drivers mlxreg-spi, mlxreg-mmio and maybe it would be correct to to use these new folder for all of them? Thanks, Vadim. > > > diff --git a/MAINTAINERS b/MAINTAINERS index bcb7f45..86a5f8f 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -8299,6 +8299,7 @@ M: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > > S: Supported > > F: Documentation/devicetree/bindings/mfd/mellanox,mlxreg-core > > F: drivers/mfd/mlxreg-core.c > > +F: drivers/mfd/mlxreg-i2c.c > > F: include/linux/platform_data/mlxreg.h > > > > MELLANOX ETHERNET DRIVER (mlx4_en) > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index > > fa1562f..453afcb 100644 > > --- a/drivers/mfd/Kconfig > > +++ b/drivers/mfd/Kconfig > > @@ -1709,6 +1709,19 @@ config MFD_MLXREG_CORE > > This driver can also be built as a module. If so the module > > will be called mlxreg-core. > > > > +config MFD_MLXREG_I2C > > + bool "Mellanox programmable device with I2C interface" > > + depends on I2C && REGMAP_I2C > > + depends on MFD_MLXREG_CORE > > + help > > + Support for the Mellanox BMC card with hardware control by a > > + programmable device. This option enables core support for the > > + programmable devices with I2C interface. It allows support for > > + the devices with address space 1 and 2 bytes. > > + > > + This driver can also be built as a module. If so the module > > + will be called mlxreg-i2c. > > + > > menu "Multimedia Capabilities Port drivers" > > depends on ARCH_SA1100 > > > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index > > 9661ee2..b76c5b2 100644 > > --- a/drivers/mfd/Makefile > > +++ b/drivers/mfd/Makefile > > @@ -222,3 +222,4 @@ obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i- > gpadc.o > > obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o > > obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o > > obj-$(CONFIG_MFD_MLXREG_CORE) += mlxreg-core.o > > +obj-$(CONFIG_MFD_MLXREG_I2C) += mlxreg-i2c.o > > diff --git a/drivers/mfd/mlxreg-i2c.c b/drivers/mfd/mlxreg-i2c.c new > > file mode 100644 index 0000000..04823b5 > > --- /dev/null > > +++ b/drivers/mfd/mlxreg-i2c.c > > @@ -0,0 +1,183 @@ > > +/* > > + * Copyright (c) 2017 Mellanox Technologies. All rights reserved. > > + * Copyright (c) 2017 Vadim Pasternak <vadimp@xxxxxxxxxxxx> > > + * > > + * Redistribution and use in source and binary forms, with or without > > + * modification, are permitted provided that the following conditions are > met: > > + * > > + * 1. Redistributions of source code must retain the above copyright > > + * notice, this list of conditions and the following disclaimer. > > + * 2. Redistributions in binary form must reproduce the above copyright > > + * notice, this list of conditions and the following disclaimer in the > > + * documentation and/or other materials provided with the > distribution. > > + * 3. Neither the names of the copyright holders nor the names of its > > + * contributors may be used to endorse or promote products derived > from > > + * this software without specific prior written permission. > > + * > > + * Alternatively, this software may be distributed under the terms of > > +the > > + * GNU General Public License ("GPL") version 2 as published by the > > +Free > > + * Software Foundation. > > + * > > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND > CONTRIBUTORS "AS IS" > > + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > LIMITED > > +TO, THE > > + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A > PARTICULAR > > +PURPOSE > > + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR > > +CONTRIBUTORS BE > > + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, > > +OR > > + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, > PROCUREMENT > > +OF > > + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR > > +BUSINESS > > + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, > > +WHETHER IN > > + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR > > +OTHERWISE) > > + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF > > +ADVISED OF THE > > + * POSSIBILITY OF SUCH DAMAGE. > > + */ > > + > > +#include <linux/device.h> > > +#include <linux/i2c.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/regmap.h> > > + > > +/** > > + * enum mlxreg_i2c_type - driver flavours: > > + * > > + * @MLXREG_8BIT: type for I2C CPLD control with 1 byte address space; > > + * @MLXREG_16BIT: type for I2C CPLD control with 2 bytes address > > +space; */ enum mlxreg_i2c_type { > > + MLXREG_8BIT, > > + MLXREG_16BIT, > > +}; > > + > > +/** > > + * Configuration for the register map of a device with 1 byte address > space. > > + */ > > +static const struct regmap_config mlxreg_i2c_regmap8_conf = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .max_register = 255, > > +}; > > + > > +/** > > + * Configuration for the register map of a device with 2 bytes address > space. > > + */ > > +static const struct regmap_config mlxreg_i2c_regmap16_conf = { > > + .reg_bits = 16, > > + .val_bits = 16, > > + .max_register = 1023, > > +}; > > + > > +static struct resource mlxreg_i2c_resources[] = { > > + [0] = DEFINE_RES_IRQ_NAMED(-1, "mlxcpld-ctrl-2c"), }; > > + > > +static int > > +mlxreg_i2c_probe(struct i2c_client *client, const struct > > +i2c_device_id *id) { > > + struct device_node *child, *np = client->dev.of_node; > > + struct platform_device *pdev; > > + struct i2c_adapter *adapter; > > + struct regmap *regmap; > > + int err = 0; > > + > > + if (!np) > > + return -ENODEV; > > + > > + if (!of_device_is_compatible(np, "mellanox,mlxreg-i2c")) > > + return -ENODEV; > > + > > + child = of_parse_phandle(np, "deferred", 0); > > + if (child) { > > + adapter = of_find_i2c_adapter_by_node(child); > > + of_node_put(child); > > + if (!adapter) > > + return -EPROBE_DEFER; > > + } > > + > > + if (!i2c_check_functionality(client->adapter, > > + I2C_FUNC_SMBUS_BYTE_DATA | > > + I2C_FUNC_SMBUS_WORD_DATA | > > + I2C_FUNC_SMBUS_I2C_BLOCK)) > > + return -ENODEV; > > + > > + switch (id->driver_data) { > > + case MLXREG_8BIT: > > + regmap = devm_regmap_init_i2c(client, > > + &mlxreg_i2c_regmap8_conf); > > + break; > > + case MLXREG_16BIT: > > + regmap = devm_regmap_init_i2c(client, > > + &mlxreg_i2c_regmap16_conf); > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + if (IS_ERR(regmap)) > > + return PTR_ERR(regmap); > > + > > + pdev = platform_device_alloc("mlxreg-core", (client->adapter->nr << > 8) > > + | client->addr); > > + if (!pdev) > > + return -ENOMEM; > > + > > + i2c_set_clientdata(client, pdev); > > + pdev->dev.parent = &client->dev; > > + pdev->dev.of_node = client->dev.of_node; > > + pdev->dev.platform_data = regmap; > > + > > + if (client->irq) { > > + mlxreg_i2c_resources[0].start = client->irq; > > + err = platform_device_add_resources(pdev, > > + mlxreg_i2c_resources, > > + ARRAY_SIZE(mlxreg_i2c_resources)); > > + } > > + > > + err = err ? err : platform_device_add(pdev); > > + > > + if (err) > > + platform_device_put(pdev); > > + > > + return err; > > +} > > + > > +static int mlxreg_i2c_remove(struct i2c_client *client) { > > + struct platform_device *pdev = i2c_get_clientdata(client); > > + > > + platform_device_unregister(pdev); > > + > > + return 0; > > +} > > + > > +static const struct i2c_device_id mlxreg_i2c_id[] = { > > + { "mlxreg-i2c", MLXREG_8BIT }, > > + { "mlxreg-i2c-16", MLXREG_16BIT }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(i2c, mlxreg_i2c_id); > > + > > +static const struct of_device_id mlxreg_i2c_dt_match[] = { > > + { .compatible = "mellanox,mlxreg-i2c" }, > > + { .compatible = "mellanox,mlxreg-i2c-16" }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, mlxreg_i2c_dt_match); > > + > > +static struct i2c_driver mlxreg_i2c_driver = { > > + .class = I2C_CLASS_HWMON, > > + .driver = { > > + .name = "mlxreg-i2c", > > + .of_match_table = of_match_ptr(mlxreg_i2c_dt_match), > > + }, > > + .probe = mlxreg_i2c_probe, > > + .remove = mlxreg_i2c_remove, > > + .id_table = mlxreg_i2c_id, > > +}; > > + > > +module_i2c_driver(mlxreg_i2c_driver); > > + > > +MODULE_AUTHOR("Vadim Pasternak <vadimp@xxxxxxxxxxxx>"); > > +MODULE_DESCRIPTION("Mellanox CPLD control I2C driver"); > > +MODULE_LICENSE("Dual BSD/GPL"); MODULE_ALIAS("mlxreg-i2c"); > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source > software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
