This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs. Changes since v3: - rebase on top of linux-next Changes since v2: - add the calibration value to device tree for LD20 reference board Changes since v1: - separate from driver's patchset[1] - add cooling-maps nodes on the device tree - fix an interrupt trigger to set 'level-triggered' according to hardware specification - bring up threshold temperature for LD20 according to the spec sheet - add cpuN labels for reference in cooling-device property on PXs2 dts [1] https://lkml.org/lkml/2017/6/28/170 Kunihiko Hayashi (2): ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 arch/arm/boot/dts/uniphier-pxs2.dtsi | 43 ++++++++++++++++++++-- .../arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4 ++ arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 40 ++++++++++++++++++++ 3 files changed, 83 insertions(+), 4 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
