Hi folks, We have a large influx of new, unmerged, drivers that are now parsing fwnode endpoints and each one of them is doing this a little bit differently. The needs are still exactly the same for the graph data structure is device independent. This is still a non-trivial task and the majority of the driver implementations are buggy, just buggy in different ways. Facilitate parsing endpoints by adding a convenience function for parsing the endpoints, and make the omap3isp and rcar-vin drivers use them as an example. To show where we're getting with this, I've added support for async sub-device notifier support that is notifiers that can be registered by sub-device drivers as well as V4L2 fwnode improvements to make use of them and the DTS changes for the Nokia N9. Some of these patches I've posted previously in this set here: <URL:http://www.spinics.net/lists/linux-media/msg118764.html> Since that, the complete callback of the master notifier registering the V4L2 device is only called once all sub-notifiers have been completed as well. This way the device node creation can be postponed until all devices have been successfully initialised. With this, the as3645a driver successfully registers a sub-device to the media device created by the omap3isp driver. The kernel also has the information it's related to the sensor driven by the smiapp driver but we don't have a way to expose that information yet. since v6: - Drop the last patch that added variant for parsing endpoints given specific port and endpoints numbers. - Separate driver changes from the fwnode endpoint parser patch into two patches. rcar-vin driver is now using the name function. - Use -ENOTCONN to tell the parser that and endpoint (or a reference) is to be ignored. - parse_endpoint and parse_single callback functions are now optional and documented as such. - Added Laurent's patch adding notifier operations struct which I rebase on the fwnode parser patchset. I wrote another patch to call the notifier operations through macros. - Add DT bindings for flash and lens devices. - V4L2 fwnode parser for references (such as flash and lens). - Added smiapp driver support for async sub-devices (lens and flash). - Added a few fixes for omap3isp. since v5: - Use v4l2_async_ prefix for static functions as well (4th patch) - Use memcpy() to copy array rather than a loop - Document that the v4l2_async_subdev pointer in driver specific struct must be the first member - Improve documentation of the added functions (4th and 5th patches) - Arguments - More thorough explation of the purpose, usage and object lifetime - Added acks since v4: - Prepend the set with three documentation fixes. - The driver's async struct must begin with struct v4l2_async_subdev. Fix this for omap3isp and document it. - Improve documentation for new functions. - Don't use devm_ family of functions for allocating memory. Introduce v4l2_async_notifier_release() to release memory resources. - Rework both v4l2_async_notifier_fwnode_parse_endpoints() and v4l2_async_notifier_fwnode_parse_endpoint() and the local functions they call. This should make the code cleaner. Despite the name, for linking and typical usage reasons the functions remain in v4l2-fwnode.c. - Convert rcar-vin to use v4l2_async_notifier_fwnode_parse_endpoint(). - Use kvmalloc() for allocating the notifier's subdevs array. - max_subdevs argument for notifier_realloc is now the total maximum number of subdevs, not the number of available subdevs. - Use fwnode_device_is_available() to make sure the device actually exists. - Move the note telling v4l2_async_notifier_fwnode_parse_endpoints() should not be used by new drivers to the last patch adding v4l2_async_notifier_fwnode_parse_endpoint(). since v3: - Rebase on current mediatree master. since v2: - Rebase on CCP2 support patches. - Prepend a patch cleaning up omap3isp driver a little. since v1: - The first patch has been merged (it was a bugfix). - In anticipation that the parsing can take place over several iterations, take the existing number of async sub-devices into account when re-allocating an array of async sub-devices. - Rework the first patch to better anticipate parsing single endpoint at a time by a driver. - Add a second patch that adds a function for parsing endpoints one at a time based on port and endpoint numbers. Laurent Pinchart (1): v4l: async: Move async subdev notifier operations to a separate structure Sakari Ailus (17): v4l: fwnode: Move KernelDoc documentation to the header v4l: async: Add V4L2 async documentation to the documentation build docs-rst: v4l: Include Qualcomm CAMSS in documentation build v4l: fwnode: Support generic parsing of graph endpoints in a device omap3isp: Use generic parser for parsing fwnode endpoints rcar-vin: Use generic parser for parsing fwnode endpoints omap3isp: Fix check for our own sub-devices omap3isp: Print the name of the entity where no source pads could be found v4l: async: Introduce macros for calling async ops callbacks v4l: async: Register sub-devices before calling bound callback v4l: async: Allow binding notifiers to sub-devices dt: bindings: Add a binding for flash devices associated to a sensor dt: bindings: Add lens-focus binding for image sensors v4l2-fwnode: Add convenience function for parsing generic references v4l2-fwnode: Add convenience function for parsing common external refs smiapp: Add support for flash and lens devices arm: dts: omap3: N9/N950: Add flash references to the camera .../devicetree/bindings/media/video-interfaces.txt | 10 + Documentation/media/kapi/v4l2-async.rst | 3 + Documentation/media/kapi/v4l2-core.rst | 1 + Documentation/media/v4l-drivers/index.rst | 1 + arch/arm/boot/dts/omap3-n9.dts | 1 + arch/arm/boot/dts/omap3-n950-n9.dtsi | 4 +- arch/arm/boot/dts/omap3-n950.dts | 1 + drivers/media/i2c/smiapp/smiapp-core.c | 29 +- drivers/media/i2c/smiapp/smiapp.h | 4 +- drivers/media/platform/am437x/am437x-vpfe.c | 8 +- drivers/media/platform/atmel/atmel-isc.c | 10 +- drivers/media/platform/atmel/atmel-isi.c | 10 +- drivers/media/platform/davinci/vpif_capture.c | 8 +- drivers/media/platform/davinci/vpif_display.c | 8 +- drivers/media/platform/exynos4-is/media-dev.c | 8 +- drivers/media/platform/omap3isp/isp.c | 127 +++----- drivers/media/platform/omap3isp/isp.h | 5 +- drivers/media/platform/pxa_camera.c | 8 +- drivers/media/platform/qcom/camss-8x16/camss.c | 8 +- drivers/media/platform/rcar-vin/rcar-core.c | 122 +++----- drivers/media/platform/rcar-vin/rcar-dma.c | 10 +- drivers/media/platform/rcar-vin/rcar-v4l2.c | 14 +- drivers/media/platform/rcar-vin/rcar-vin.h | 4 +- drivers/media/platform/rcar_drif.c | 10 +- drivers/media/platform/soc_camera/soc_camera.c | 14 +- drivers/media/platform/stm32/stm32-dcmi.c | 10 +- drivers/media/platform/ti-vpe/cal.c | 8 +- drivers/media/platform/xilinx/xilinx-vipp.c | 8 +- drivers/media/v4l2-core/v4l2-async.c | 184 +++++++++--- drivers/media/v4l2-core/v4l2-fwnode.c | 319 ++++++++++++++++----- drivers/staging/media/imx/imx-media-dev.c | 8 +- include/media/v4l2-async.h | 78 ++++- include/media/v4l2-fwnode.h | 165 ++++++++++- 33 files changed, 862 insertions(+), 346 deletions(-) create mode 100644 Documentation/media/kapi/v4l2-async.rst -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
