From: Marcus Cooper <codekipper@xxxxxxxxx>
Add the new DAI blocks to the device tree. I2S0 and I2S1 are for
connecting to an external codec whereas I2S2 is used for HDMI
audio.
Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 39 ++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 11240a8313c2..cf6fcc857324 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -450,6 +450,45 @@
status = "disabled";
};
+ i2s0: i2s@01c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ resets = <&ccu RST_BUS_I2S0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@01c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ resets = <&ccu RST_BUS_I2S1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s2: i2s@01c22800 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22800 0x400>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 5>, <&dma 5>;
+ resets = <&ccu RST_BUS_I2S2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
