Hi, On 31 August 2017 at 15:16, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote: > On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang@xxxxxxxxxxxxxx> wrote: > >> In some scenarios, we should set some pins as input/output/pullup/pulldown >> when the specified system goes into deep sleep mode, then when the system >> goes into deep sleep mode, these pins will be set automatically by hardware. >> >> That means some pins are not controlled by any specific driver in the OS, but >> need to be controlled when entering sleep mode. Thus we introduce one sleep >> state config into pinconf-generic for users to configure. >> >> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx> >> --- >> Changes since v4: >> - Add sleep-hardware-state config to indicate sleep related configs. > > No reactions and I can certainly not think of anything better (I even > suggested this) so patch applied. > > Sorry for taking so long to look at this, I've been choked :/ I can understand you are so busy :), thanks for your help. -- Baolin.wang Best Regards -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
