* Sebastian Reichel <sre@xxxxxxxxxx> [170830 12:38]:
> On Wed, Aug 30, 2017 at 08:19:44AM -0700, Tony Lindgren wrote:
> Maybe change the leading text:
>
> OMAP3's Synchronous Serial Interface (SSI) controller implements a
> legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
> while the controller found inside OMAP4 is supposed to be fully compliant
> with the HSI standard.
OK
> > Required properties:
> > -- compatible: Should include "ti,omap3-ssi".
> > +- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi"
> > - reg-names: Contains the values "sys" and "gdd" (in this order).
> > - reg: Contains a matching register specifier for each entry
> > in reg-names.
> > @@ -27,6 +27,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
> > Required Port sub-node properties:
> > - compatible: Should be set to the following value
> > ti,omap3-ssi-port (applicable to OMAP34xx devices)
> > + ti,omap4-ssi-port (applicable to OMAP44xx devices)
> ^^^
>
> this should be hsi.
Oops fixed.
> otherwise:
>
> Reviewed-by: Sebastian Reichel <sre@xxxxxxxxxx>
Thanks, updated patch below.
Regards,
Tony
8< --------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@xxxxxxxxxxx>
Date: Wed, 30 Aug 2017 08:07:51 -0700
Subject: [PATCH] ARM: dts: Add missing hsi node for omap4
On omap4 we're missing the hsi node with it's related "ti,hwmods"
property that the SoC interconnect code needs.
Note that this will only show up as a bug with "doesn't have
mpu register target base" boot errors when the legacy platform
data is removed.
Let's also update the binding accrodingly while at it.
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Reviewed-by: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/hsi/omap-ssi.txt | 13 +++++++--
arch/arm/boot/dts/omap4.dtsi | 34 ++++++++++++++++++++++
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -1,10 +1,12 @@
OMAP SSI controller bindings
-OMAP Synchronous Serial Interface (SSI) controller implements a legacy
-variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+OMAP3's Synchronous Serial Interface (SSI) controller implements a
+legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
+while the controller found inside OMAP4 is supposed to be fully compliant
+with the HSI standard.
Required properties:
-- compatible: Should include "ti,omap3-ssi".
+- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi"
- reg-names: Contains the values "sys" and "gdd" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
Required Port sub-node properties:
- compatible: Should be set to the following value
ti,omap3-ssi-port (applicable to OMAP34xx devices)
+ ti,omap4-hsi-port (applicable to OMAP44xx devices)
- reg-names: Contains the values "tx" and "rx" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
@@ -38,6 +41,10 @@ Required Port sub-node properties:
property. If it's missing the port will not be
enabled.
+Optional properties:
+- ti,hwmods: Shall contain TI interconnect module name if needed
+ by the SoC
+
Example for Nokia N900:
ssi-controller@48058000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -632,6 +632,40 @@
dma-names = "tx", "rx";
};
+ hsi: hsi@4a058000 {
+ compatible = "ti,omap4-hsi";
+ reg = <0x4a058000 0x4000>,
+ <0x4a05c000 0x1000>;
+ reg-names = "sys", "gdd";
+ ti,hwmods = "hsi";
+
+ clocks = <&hsi_fck>;
+ clock-names = "hsi_fck";
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a058000 0x4000>;
+
+ hsi_port1: hsi-port@2000 {
+ compatible = "ti,omap4-hsi-port";
+ reg = <0x2000 0x800>,
+ <0x2800 0x800>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ hsi_port2: hsi-port@3000 {
+ compatible = "ti,omap4-hsi-port";
+ reg = <0x3000 0x800>,
+ <0x3800 0x800>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
