Re: [PATCH 5/6] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/21/2014 01:47 PM, Christoph Fritz wrote:
> Full device tree support for clock control is not yet accomplished. Until
> then, configure the 24Mhz of sys_clkout2 to feed an USB-Hub here.

you may want to look at next-20140120 or later next tag for your
development.

> 
> Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
> ---
>  arch/arm/mach-omap2/pdata-quirks.c |   37 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
> index bce8020..07d05f6 100644
> --- a/arch/arm/mach-omap2/pdata-quirks.c
> +++ b/arch/arm/mach-omap2/pdata-quirks.c
> @@ -95,6 +95,43 @@ static void __init omap3_zoom_legacy_init(void)
>  
>  static void __init omap3_dbb056_legacy_init(void)
>  {
> +	struct clk *clkout2;
> +	struct clk *cm96fck;
> +
> +	/* Reparent clkout2 to 96M_FCK */
> +	pr_info("a83x-quirk: Late Reparent clkout2 to 96M_FCK\n");
> +	clkout2 = clk_get(NULL, "clkout2_src_ck");
> +	if(clkout2 < 0) {
> +		pr_err("a83x-quirk: couldn't get clkout2_src_ck\n");
> +		return;
> +	}
> +	cm96fck = clk_get(NULL, "cm_96m_fck");
> +	if(cm96fck < 0) {
> +		pr_err("a83x-quirk: couldn't get cm_96m_fck\n");
> +		return;
> +	}
> +	if(clk_set_parent(clkout2, cm96fck) < 0) {
> +		pr_err("a83x-quirk: couldn't reparent clkout2_src_ck\n");
> +		return;
> +	}
> +
> +	/* Set clkout2 to 24MHz for internal usb hub*/
> +	pr_info("a83x-quirk: Set clkout2 to 24MHz for internal usb hub\n");
> +	clkout2 = clk_get(NULL, "sys_clkout2");
> +	if(clkout2 < 0) {
> +		pr_err("a83x-quirk: couldn't get sys_clkout2\n");
> +		return;
> +	}
> +	if(clk_set_rate(clkout2, 24000000) < 0) {
> +		printk(KERN_ERR "board-omap3evm: couldn't set sys_clkout2 rate\n");
> +		return;
> +	}
> +	if(clk_prepare_enable(clkout2) < 0) {
> +		pr_err("a83x-quirk: couldn't enable sys_clkout2\n");
> +		return;
> +	}
> +
> +	/* Initialize display */
>  	omap3_dbb056_display_init_of();
>  }
>  #endif /* CONFIG_ARCH_OMAP3 */
> 


-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux