Re: [PATCH 1/6] ARM: dts: Add CPU OPP table for omap37xx100

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/21/2014 01:47 PM, Christoph Fritz wrote:
> This patch adds file omap37xx100.dtsi which includs a SoC specific table
> for CPU OPP.
> 
> Please keep in mind that am/dm37xx100 variants differ from am/dm37xx
> SoCs without nomenclature marker prefix "100". This marker indicates
> the maximum cpu frequency. 100 stands for 1 GHz-Cortex-A8, blank means
> maximum 800 MHz.
> 
> For more info, see Datasheet http://www.ti.com/lit/ds/sprs685d/sprs685d.pdf
> section 7.2.1 "Device and Development-Support Tool Nomenclature".
> 
> Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/omap37xx100.dtsi |   44 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 arch/arm/boot/dts/omap37xx100.dtsi
> 
> diff --git a/arch/arm/boot/dts/omap37xx100.dtsi b/arch/arm/boot/dts/omap37xx100.dtsi
> new file mode 100644
> index 0000000..064661e
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap37xx100.dtsi
> @@ -0,0 +1,44 @@
> +/*
> + * Device Tree Source for OMAP37x SoC
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include "omap3.dtsi"
> +
> +/ {
> +	aliases {
> +		serial3 = &uart4;
> +	};
> +
> +	cpus {
> +		/* AM/DM37xx */
> +		cpu@0 {
> +			operating-points = <
> +				/* kHz    uV */
> +				 125000   975000
> +				 250000  1075000
> +				 500000  1100000
> +				 600000  1140000
> +				 800000  1270000
> +				1000000  1380000

This is valid even for 3630/DM3730 as well -> unfortunately - you
cannot enable 1GHz without enabling ABB and AVS 1.5.

There is a bunch of internal discussion with respect to lack of this
information available.. but as it stands right now, I dont think this
is valid.

> +			>;
> +			clock-latency = <300000>; /* From legacy driver */
> +		};
> +	};
> +
> +	ocp {
> +		/* uart4 is only available on CBP and CBC packages */
> +		uart4: serial@49042000 {
> +			compatible = "ti,omap3-uart";
> +			reg = <0x49042000 0x400>;
> +			interrupts = <80>;
> +			dmas = <&sdma 81 &sdma 82>;
> +			dma-names = "tx", "rx";
> +			ti,hwmods = "uart4";
> +			clock-frequency = <48000000>;
> +		};
> +	};
> +};
> 
Further, we should be able to reuse 3630.dtsi for this.


-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux