On Mon, Aug 21, 2017 at 02:46:12PM -0500, eajames@xxxxxxxxxxxxxxxxxx wrote:
> From: "Edward A. James" <eajames@xxxxxxxxxx>
>
> Add the driver to monitor IBM CFF power supplies with hwmon over
> pmbus.
>
> Signed-off-by: Edward A. James <eajames@xxxxxxxxxx>
Applied to hwmon-next with the following changes:
- "default n" is unnecessary.
- include jiffies.h is unnecessary, but we need to include bitops.h.
Thanks,
Guenter
> ---
> drivers/hwmon/pmbus/Kconfig | 10 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/ibm-cffps.c | 151 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 162 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 68d717a..f3de18a 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -37,6 +37,16 @@ config SENSORS_ADM1275
> This driver can also be built as a module. If so, the module will
> be called adm1275.
>
> +config SENSORS_IBM_CFFPS
> + tristate "IBM Common Form Factor Power Supply"
> + default n
> + help
> + If you say yes here you get hardware monitoring support for the IBM
> + Common Form Factor power supply.
> +
> + This driver can also be built as a module. If so, the module will
> + be called ibm-cffps.
> +
> config SENSORS_IR35221
> tristate "Infineon IR35221"
> default n
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 75bb7ca..737fa4e 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
> obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
> obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
> obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
> diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
> new file mode 100644
> index 0000000..1a6294c
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/ibm-cffps.c
> @@ -0,0 +1,151 @@
> +/*
> + * Copyright 2017 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +
> +#include "pmbus.h"
> +
> +/* STATUS_MFR_SPECIFIC bits */
> +#define CFFPS_MFR_FAN_FAULT BIT(0)
> +#define CFFPS_MFR_THERMAL_FAULT BIT(1)
> +#define CFFPS_MFR_OV_FAULT BIT(2)
> +#define CFFPS_MFR_UV_FAULT BIT(3)
> +#define CFFPS_MFR_PS_KILL BIT(4)
> +#define CFFPS_MFR_OC_FAULT BIT(5)
> +#define CFFPS_MFR_VAUX_FAULT BIT(6)
> +#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
> +
> +static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
> + int reg)
> +{
> + int rc, mfr;
> +
> + switch (reg) {
> + case PMBUS_STATUS_VOUT:
> + case PMBUS_STATUS_IOUT:
> + case PMBUS_STATUS_TEMPERATURE:
> + case PMBUS_STATUS_FAN_12:
> + rc = pmbus_read_byte_data(client, page, reg);
> + if (rc < 0)
> + return rc;
> +
> + mfr = pmbus_read_byte_data(client, page,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfr < 0)
> + /*
> + * Return the status register instead of an error,
> + * since we successfully read status.
> + */
> + return rc;
> +
> + /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
> + if (reg == PMBUS_STATUS_FAN_12) {
> + if (mfr & CFFPS_MFR_FAN_FAULT)
> + rc |= PB_FAN_FAN1_FAULT;
> + } else if (reg == PMBUS_STATUS_TEMPERATURE) {
> + if (mfr & CFFPS_MFR_THERMAL_FAULT)
> + rc |= PB_TEMP_OT_FAULT;
> + } else if (reg == PMBUS_STATUS_VOUT) {
> + if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT))
> + rc |= PB_VOLTAGE_OV_FAULT;
> + if (mfr & CFFPS_MFR_UV_FAULT)
> + rc |= PB_VOLTAGE_UV_FAULT;
> + } else if (reg == PMBUS_STATUS_IOUT) {
> + if (mfr & CFFPS_MFR_OC_FAULT)
> + rc |= PB_IOUT_OC_FAULT;
> + if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING)
> + rc |= PB_CURRENT_SHARE_FAULT;
> + }
> + break;
> + default:
> + rc = -ENODATA;
> + break;
> + }
> +
> + return rc;
> +}
> +
> +static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
> + int reg)
> +{
> + int rc, mfr;
> +
> + switch (reg) {
> + case PMBUS_STATUS_WORD:
> + rc = pmbus_read_word_data(client, page, reg);
> + if (rc < 0)
> + return rc;
> +
> + mfr = pmbus_read_byte_data(client, page,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfr < 0)
> + /*
> + * Return the status register instead of an error,
> + * since we successfully read status.
> + */
> + return rc;
> +
> + if (mfr & CFFPS_MFR_PS_KILL)
> + rc |= PB_STATUS_OFF;
> + break;
> + default:
> + rc = -ENODATA;
> + break;
> + }
> +
> + return rc;
> +}
> +
> +static struct pmbus_driver_info ibm_cffps_info = {
> + .pages = 1,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
> + PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
> + PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
> + PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
> + .read_byte_data = ibm_cffps_read_byte_data,
> + .read_word_data = ibm_cffps_read_word_data,
> +};
> +
> +static int ibm_cffps_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + return pmbus_do_probe(client, id, &ibm_cffps_info);
> +}
> +
> +static const struct i2c_device_id ibm_cffps_id[] = {
> + { "ibm_cffps1", 1 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, ibm_cffps_id);
> +
> +static const struct of_device_id ibm_cffps_of_match[] = {
> + { .compatible = "ibm,cffps1" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, ibm_cffps_of_match);
> +
> +static struct i2c_driver ibm_cffps_driver = {
> + .driver = {
> + .name = "ibm-cffps",
> + .of_match_table = ibm_cffps_of_match,
> + },
> + .probe = ibm_cffps_probe,
> + .remove = pmbus_do_remove,
> + .id_table = ibm_cffps_id,
> +};
> +
> +module_i2c_driver(ibm_cffps_driver);
> +
> +MODULE_AUTHOR("Eddie James");
> +MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
> +MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
