* Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> [170829 05:37]: > On Tuesday, 29 August 2017 00:19:10 EEST Tony Lindgren wrote: > > On omap4 we're missing the iss node with it's related "ti,hwmods" > > property that the SoC interconnect code needs. > > > > Note that this will only show up as a bug with "doesn't have > > mpu register target base" boot errors when the legacy platform > > data is removed. ... > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/ti-iss.txt > > @@ -0,0 +1,32 @@ > > +Texas Instruments Imaging Subsystem (ISS) binding > > + > > +ISS is used for cameras on Texas Instruments SoCs. > > + > > + > > +Required properties: > > + > > +compatible: Shall be one of the following: > > + "ti,omap4-iss" > > + > > +reg: Shall contain the device instance IO range > > + > > +interrupts: Shall contain the device instance interrupt > > + > > + > > +Optional properties: > > + > > +reg-names: Shall contain the IO range names if multiple IO > > + ranges are used by the SoC > > + > > +ti,hwmods: Shall contain the TI interconnect module name if needed > > + by the SoC > > This isn't enough. The ISS isn't a stand-alone IP core, it is connected to > external devices and those connections must be modelled in DT similarly to the > OMAP3 ISP. OK I'll add a note about those so the driver can add those later with a separate patch. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
