Re: [PATCH v4 3/4] dt-bindings: PCI: rockchip: Add support for pcie wake irq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Aug 25, 2017 at 1:20 PM, Brian Norris <briannorris@xxxxxxxxxxxx> wrote:
> On Fri, Aug 25, 2017 at 01:14:39PM -0500, Rob Herring wrote:
>> On Tue, Aug 22, 2017 at 11:19:33AM +0800, Jeffy Chen wrote:
>> > Add an optional interrupt for PCIE_WAKE pin.
>> >
>> > Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
>> > ---
>> >
>> > Changes in v4: None
>> > Changes in v3: None
>> > Changes in v2: None
>> >
>> >  .../devicetree/bindings/pci/rockchip-pcie.txt        | 20 ++++++++++++--------
>> >  1 file changed, 12 insertions(+), 8 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> > index 5678be82530d..9f6504129e80 100644
>> > --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> > +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> > @@ -20,10 +20,13 @@ Required properties:
>> >  - msi-map: Maps a Requester ID to an MSI controller and associated
>> >     msi-specifier data. See ./pci-msi.txt
>> >  - interrupts: Three interrupt entries must be specified.
>> > -- interrupt-names: Must include the following names
>> > -   - "sys"
>> > -   - "legacy"
>> > -   - "client"
>> > +- interrupt-names: Include the following names
>> > +   Required:
>> > +           - "sys"
>> > +           - "legacy"
>> > +           - "client"
>> > +   Optional:
>> > +           - "wake"
>>
>> Use the wakeup source binding:
>> Documentation/devicetree/bindings/power/wakeup-source.txt
>
> And I suppose this means we'd fall under this paragraph?
>
>     "However if the devices have dedicated interrupt as the wakeup source
>     then they need to specify/identify the same using device specific
>     interrupt name. In such cases only that interrupt can be used as wakeup
>     interrupt."
>
> We don't expect *any* interrupt to qualify as PCI WAKE#; so we should
> still also document the interrupt name ("wake"?) in
> Documentation/devicetree/bindings/pci/pci.txt as Bjorn suggested, in
> addition to using the 'wakeup-source' property documented there.

I believe the defined interrupt name is "wakeup" as example 1 shows.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux