On Baseboard Management Controller (BMC) systems it's sometimes necessary for a LED to retain its state across a BMC reset (which is independent of the host system state). Add a devicetree property to describe this behaviour. The property would typically be used in conjunction with 'default-state = "keep"'. Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> --- Documentation/devicetree/bindings/leds/leds-gpio.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt index 76535ca37120..a48dda268f81 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -18,6 +18,9 @@ LED sub-node properties: see Documentation/devicetree/bindings/leds/common.txt - retain-state-suspended: (optional) The suspend state can be retained.Such as charge-led gpio. +- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. + Useful in BMC systems, for example when the BMC is rebooted while the host + remains up. - panic-indicator : (optional) see Documentation/devicetree/bindings/leds/common.txt -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
