Change DT files to remain coherent with changes in
accompanying drivers.
1. replace "sdhci" with "mmc"
2. add bus-width property to mmc node
3. drop device_type property
4. replace "mac@" with "ethernet@"
5. replace CONFIG_MMC_SDHCI_MOXART with CONFIG_MMC_MOXART
Signed-off-by: Jonas Jensen <jonas.jensen@xxxxxxxxx>
---
Notes:
Applies on top of:
"[PATCH] ARM: moxart: move fixed rate clock child node to board level dts"
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-January/226141.html
Applies to next-20140121
arch/arm/boot/dts/moxart-uc7112lx.dts | 5 ++---
arch/arm/boot/dts/moxart.dtsi | 8 ++++----
arch/arm/configs/moxart_defconfig | 2 +-
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index 10d088d..ee6ef7c 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -80,15 +80,15 @@
clocks = <&ref12>;
};
-&sdhci {
+&mmc {
status = "okay";
+ bus-width = <4>;
};
&mdio0 {
status = "okay";
ethphy0: ethernet-phy@1 {
- device_type = "ethernet-phy";
compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
@@ -98,7 +98,6 @@
status = "okay";
ethphy1: ethernet-phy@1 {
- device_type = "ethernet-phy";
compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index 1fd27ed..97c8084 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -90,8 +90,8 @@
clocks = <&clk_apb>;
};
- sdhci: sdhci@98e00000 {
- compatible = "moxa,moxart-sdhci";
+ mmc: mmc@98e00000 {
+ compatible = "moxa,moxart-mmc";
reg = <0x98e00000 0x5C>;
interrupts = <5 0>;
clocks = <&clk_apb>;
@@ -117,7 +117,7 @@
status = "disabled";
};
- mac0: mac@90900000 {
+ mac0: ethernet@90900000 {
compatible = "moxa,moxart-mac";
reg = <0x90900000 0x90>;
interrupts = <25 0>;
@@ -126,7 +126,7 @@
status = "disabled";
};
- mac1: mac@92000000 {
+ mac1: ethernet@92000000 {
compatible = "moxa,moxart-mac";
reg = <0x92000000 0x90>;
interrupts = <27 0>;
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index a3cb76c..708c0cf 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -107,7 +107,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_MOXART_WDT=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-CONFIG_MMC_SDHCI_MOXART=y
+CONFIG_MMC_MOXART=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
