Re: [PATCH v2 1/3] media: V3s: Add support for Allwinner CSI.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 23 Aug 2017 21:24:13 +0200
Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:

> On Wed, Aug 23, 2017 at 10:41:18AM +0800, Yong wrote:
> > > > > > +static irqreturn_t sun6i_csi_isr(int irq, void *dev_id)
> > > > > > +{
> > > > > > +	struct sun6i_csi_dev *sdev = (struct sun6i_csi_dev *)dev_id;
> > > > > > +	struct regmap *regmap = sdev->regmap;
> > > > > > +	u32 status;
> > > > > > +
> > > > > > +	regmap_read(regmap, CSI_CH_INT_STA_REG, &status);
> > > > > > +
> > > > > > +	if ((status & CSI_CH_INT_STA_FIFO0_OF_PD) ||
> > > > > > +	    (status & CSI_CH_INT_STA_FIFO1_OF_PD) ||
> > > > > > +	    (status & CSI_CH_INT_STA_FIFO2_OF_PD) ||
> > > > > > +	    (status & CSI_CH_INT_STA_HB_OF_PD)) {
> > > > > > +		regmap_write(regmap, CSI_CH_INT_STA_REG, status);
> > > > > > +		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
> > > > > > +		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN,
> > > > > > +				   CSI_EN_CSI_EN);
> > > > > 
> > > > > You need to enable / disable it at every frame? How do you deal with
> > > > > double buffering? (or did you choose to ignore it for now?)
> > > > 
> > > > These *_OF_PD status bits indicate an overflow error condition.
> > > 
> > > Shouldn't we return an error code then? The names of these flags could
> > > be better too.
> > 
> > Then, where and how to deal with the error coce.
> 
> If you want to deal with FIFO overflow, I'm not sure you have anything
> to do. It means, you've been to slow to queue buffers, so I guess
> stopping the pipeline until more buffers are queued would make
> sense. And we should probably increase the sequence number while doing
> so to notify the userspace that some frames were lost.

If there is no queued buffers, the CSI must has been already stoped by
sun6i_video_frame_done. So, the FIFO overflow may only occur on some 
unpredictable conditions or something I don't know.

For sequence number, I can't actually get the number of the lost frames.

Maybe I misunderstood you. Did you mean use IRQ_RETVAL(error) instead
of IRQ_HANDLED?

> 
> Maxime
> 
> -- 
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com


Thanks,
Yong
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux