Add DT support for panel-dsi-cm.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/omap2/displays-new/panel-dsi-cm.c | 65 +++++++++++++++++++++++--
1 file changed, 61 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/omap2/displays-new/panel-dsi-cm.c
index b7baafe83aa3..d302c4428ab7 100644
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ b/drivers/video/omap2/displays-new/panel-dsi-cm.c
@@ -22,6 +22,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -595,10 +597,13 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
.lp_clk_max = 10000000,
};
- r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
- if (r) {
- dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n");
- goto err0;
+ if (ddata->pin_config.num_pins > 0) {
+ r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
+ if (r) {
+ dev_err(&ddata->pdev->dev,
+ "failed to configure DSI pins\n");
+ goto err0;
+ }
}
r = in->ops.dsi->set_config(in, &dsi_config);
@@ -1156,6 +1161,46 @@ static int dsicm_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int dsicm_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in;
+ int gpio;
+
+ gpio = of_get_gpio(node, 0);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(&pdev->dev, "failed to parse reset gpio\n");
+ return gpio;
+ }
+ ddata->reset_gpio = gpio;
+
+ if (of_gpio_count(node) > 1) {
+ gpio = of_get_gpio(node, 1);
+
+ if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+ ddata->ext_te_gpio = gpio;
+ } else {
+ dev_err(&pdev->dev, "failed to parse TE gpio\n");
+ return gpio;
+ }
+ } else {
+ ddata->ext_te_gpio = -1;
+ }
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ /* TODO: ulps, backlight */
+
+ return 0;
+}
+
static int dsicm_probe(struct platform_device *pdev)
{
struct backlight_properties props;
@@ -1178,6 +1223,10 @@ static int dsicm_probe(struct platform_device *pdev)
r = dsicm_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = dsicm_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -1320,12 +1369,20 @@ static int __exit dsicm_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id dsicm_of_match[] = {
+ { .compatible = "omapdss,panel-dsi-cm", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, dsicm_of_match);
+
static struct platform_driver dsicm_driver = {
.probe = dsicm_probe,
.remove = __exit_p(dsicm_remove),
.driver = {
.name = "panel-dsi-cm",
.owner = THIS_MODULE,
+ .of_match_table = dsicm_of_match,
},
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
