omapdss driver uses a omapdss platform device to pass platform specific function pointers and DSS hardware version from the arch code to the driver. This device is needed also when booting with DT. This patch adds omapdss_init_of() function, called from board-generic at init time, which creates the omapdss device. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> --- arch/arm/mach-omap2/board-generic.c | 2 + arch/arm/mach-omap2/common.h | 2 + arch/arm/mach-omap2/display.c | 76 +++++++++++++++++++++++++++++++++++++ 3 files changed, 80 insertions(+) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 8d972ff18c56..842e4f21ab09 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -36,6 +36,8 @@ static struct of_device_id omap_dt_match_table[] __initdata = { static void __init omap_generic_init(void) { pdata_quirks_init(omap_dt_match_table); + + omapdss_init_of(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index e30ef6797c63..04a4d360dd20 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -307,5 +307,7 @@ extern int omap_dss_reset(struct omap_hwmod *); /* SoC specific clock initializer */ extern int (*omap_clk_init)(void); +int __init omapdss_init_of(void); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 4cf165502b35..77cd927e5acb 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -23,6 +23,8 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_platform.h> #include <video/omapdss.h> #include "omap_hwmod.h" @@ -552,3 +554,77 @@ int omap_dss_reset(struct omap_hwmod *oh) return r; } + +int __init omapdss_init_of(void) +{ + int r; + enum omapdss_version ver; + struct device_node *node; + + static struct omap_dss_board_info board_data = { + .dsi_enable_pads = omap_dsi_enable_pads, + .dsi_disable_pads = omap_dsi_disable_pads, + .get_context_loss_count = omap_pm_get_dev_context_loss_count, + .set_min_bus_tput = omap_dss_set_min_bus_tput, + }; + + /* only create dss helper devices if dss is enabled in the .dts */ + + node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss"); + if (!node) + node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss"); + if (!node) + node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss"); + if (!node) + return 0; + + if (!of_device_is_available(node)) + return 0; + + ver = omap_display_get_version(); + + if (ver == OMAPDSS_VER_UNKNOWN) { + pr_err("DSS not supported on this SoC\n"); + return -ENODEV; + } + + board_data.version = ver; + + omap_display_device.dev.platform_data = &board_data; + + r = platform_device_register(&omap_display_device); + if (r < 0) { + pr_err("Unable to register omapdss device\n"); + return r; + } + + /* create DRM device */ + r = omap_init_drm(); + if (r < 0) { + pr_err("Unable to register omapdrm device\n"); + return r; + } + + /* create vrfb device */ + r = omap_init_vrfb(); + if (r < 0) { + pr_err("Unable to register omapvrfb device\n"); + return r; + } + + /* create FB device */ + r = omap_init_fb(); + if (r < 0) { + pr_err("Unable to register omapfb device\n"); + return r; + } + + /* create V4L2 display device */ + r = omap_init_vout(); + if (r < 0) { + pr_err("Unable to register omap_vout device\n"); + return r; + } + + return 0; +} -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html