Hi William, Am Donnerstag, 17. August 2017, 15:54:49 CEST schrieb William Wu: > RK3328 has one USB 3.0 OTG controller which uses DWC_USB3 > core's general architecture. It can act as static xHCI host > controller, static device controller, USB 3.0/2.0 OTG basing > on ID of USB3.0 PHY. > > Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx> > --- > Changes in v2: > - Modify the dwc3 quirk "snps,tx-ipgap-linecheck-dis-quirk" to > "snps,dis-tx-ipgap-linecheck-quirk" > > .../devicetree/bindings/usb/rockchip,dwc3.txt | 4 +++- > arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++ > 2 files changed, 30 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt > index 0536a93..d6b2e47 100644 > --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt > @@ -1,7 +1,9 @@ > Rockchip SuperSpeed DWC3 USB SoC controller > > Required properties: > -- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC > +- compatible: should be one of the following: > + - "rockchip,rk3399-dwc3": for rk3399 SoC > + - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC > - clocks: A list of phandle + clock-specifier pairs for the > clocks listed in clock-names > - clock-names: Should contain the following: This probably shouldn't be part of the patch adding the dts node, but instead should be a separate patch and should either go through some usb tree or at least get an Ack from usb maintainers (Felipe Balbi and/or Greg Kroah Hartman), so you should definitly include them into your recipient list. Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
