-----Original Message----- From: Shawn Guo [mailto:shawnguo@xxxxxxxxxx] Sent: Thursday, August 17, 2017 10:03 PM To: Yinbo Zhu <yinbo.zhu@xxxxxxx> Cc: linux-devel@xxxxxxxxxxxxxxxxxxxx; Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Catalin Marinas <catalin.marinas@xxxxxxx>; Will Deacon <will.deacon@xxxxxxx>; Harninder Rai <harninder.rai@xxxxxxx>; Andy Tang <andy.tang@xxxxxxx>; open list: <devicetree@xxxxxxxxxxxxxxx>; Ashish Kumar <ashish.kumar@xxxxxxx>; open list <linux-kernel@xxxxxxxxxxxxxxx>; Raghav Dogra <raghav.dogra@xxxxxxx>; moderated list: <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx> Subject: Re: [PATCH] arm64: dts: ls1088a: Add USB support On Thu, Aug 17, 2017 at 10:52:38AM +0800, yinbo.zhu@xxxxxxx wrote: > From: "yinbo.zhu" <yinbo.zhu@xxxxxxx> > > Fix the issue that usb is not detected on ls1088ardb > > Signed-off-by: yinbo.zhu <yinbo.zhu@xxxxxxx> > Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx> > --- > arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++ > 2 files changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > index e9276a5..949cd67 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > @@ -145,6 +145,14 @@ > status = "okay"; > }; > > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > &esdhc { > status = "okay"; > }; Sort the labelled node alphabetically. > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > index 3a3be87..0dbff29 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > @@ -458,6 +458,24 @@ > status = "disabled"; > }; > > + usb0: usb3@3100000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x3100000 0x0 0x10000>; > + interrupts = <0 80 0x4>; /* Level high type */ Use IRQ_TYPE_LEVEL_HIGH, so that you can save the comment. > + dr_mode = "host"; > + configure-gfladj; What is this? I do not see it in upstream kernel. > + snps,dis_rxdet_inp3_quirk; You probably need a "disabled" status. Shawn Hi Shawn, About your description " You probably need a "disabled" status." Your meaning is that remove the property "snps,dis_rxdet_inp3_quirk;", isn't it? In fact, if remove the property , 1088ardb usb will doesn't detect. Yinbo > + }; > + > + usb1: usb3@3110000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x3110000 0x0 0x10000>; > + interrupts = <0 81 0x4>; /* Level high type */ > + dr_mode = "host"; > + configure-gfladj; > + snps,dis_rxdet_inp3_quirk; > + }; > + > sata: sata@3200000 { > compatible = "fsl,ls1088a-ahci"; > reg = <0x0 0x3200000 0x0 0x10000>, > -- > 2.1.0.27.g96db324 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
