On 08/16/2017 09:58 AM, Andy Gross wrote:
This patch adds the necessary #phy-cells property to the DSI and HDMI
phys.
The DSI and HDMI drivers don't use the common PHY framework, so we end up
being okay without #phy-cells. But we do follow the PHY DT bindings, so it's
necessary in that sense.
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
Signed-off-by: Andy Gross <andy.gross@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index f3db185..d08f3db 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -906,11 +906,11 @@
usb_hs1_phy: phy {
compatible = "qcom,usb-hs-phy-apq8064",
"qcom,usb-hs-phy";
- #phy-cells = <0>;
clocks = <&sleep_clk>, <&cxo_board>;
clock-names = "sleep", "ref";
resets = <&usb1 0>;
reset-names = "por";
+ #phy-cells = <0>;
};
};
};
@@ -1263,6 +1263,7 @@
dsi0_phy: dsi-phy@4700200 {
compatible = "qcom,dsi-phy-28nm-8960";
#clock-cells = <1>;
+ #phy-cells = <0>;
reg = <0x04700200 0x100>,
<0x04700300 0x200>,
@@ -1417,6 +1418,7 @@
clocks = <&mmcc HDMI_S_AHB_CLK>;
clock-names = "slave_iface_clk";
+ #phy-cells = <0>;
};
mdp: mdp@5100000 {
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
