Add 27 MHz oscillator and two clock controller nodes.
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
arch/arm64/boot/dts/realtek/rtd1295.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
index 77063e984db9..078a11506876 100644
--- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
@@ -81,6 +81,13 @@
(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
};
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ clock-output-names = "osc27M";
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -88,6 +95,13 @@
/* Exclude up to 2 GiB of RAM */
ranges = <0x80000000 0x80000000 0x80000000>;
+ clkc: clock-controller@98000000 {
+ compatible = "realtek,rtd1295-clk";
+ reg = <0x98000000 0x1000>;
+ clocks = <&osc27M>;
+ #clock-cells = <1>;
+ };
+
reset1: reset-controller@98000000 {
compatible = "realtek,rtd1295-reset";
reg = <0x98000000 0x4>;
@@ -112,6 +126,13 @@
#reset-cells = <1>;
};
+ iso_clkc: clock-controller@98007000 {
+ compatible = "realtek,rtd1295-iso-clk";
+ reg = <0x98007000 0x100>;
+ clocks = <&osc27M>;
+ #clock-cells = <1>;
+ };
+
iso_irq_mux: interrupt-controller@98007000 {
compatible = "realtek,rtd1295-iso-irq-mux";
reg = <0x98007000 0x100>;
--
2.12.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
