Hi Jacek,
Thanks for the review.
On Wed, Aug 16, 2017 at 10:27:27PM +0200, Jacek Anaszewski wrote:
> Hi Sakari,
>
> Thanks for the patch. One issue below.
>
> On 08/16/2017 02:55 PM, Sakari Ailus wrote:
> > From: Sakari Ailus <sakari.ailus@xxxxxx>
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/leds/ams,as3645a.txt | 56 ++++++++++++++++++++++
> > 1 file changed, 56 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/leds/ams,as3645a.txt
> >
> > diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
> > new file mode 100644
> > index 000000000000..00066e3f9036
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
> > @@ -0,0 +1,56 @@
> > +Analog devices AS3645A device tree bindings
> > +
> > +The AS3645A flash LED controller can drive two LEDs, one high current
> > +flash LED and one indicator LED. The high current flash LED can be
> > +used in torch mode as well.
> > +
> > +Ranges below noted as [a, b] are closed ranges between a and b, i.e. a
> > +and b are included in the range.
> > +
> > +
> > +Required properties
> > +===================
> > +
> > +compatible : Must be "ams,as3645a".
> > +reg : The I2C address of the device. Typically 0x30.
> > +
> > +
> > +Required properties of the "flash" child node
> > +=============================================
> > +
> > +flash-timeout-us: Flash timeout in microseconds. The value must be in
> > + the range [100000, 850000] and divisible by 50000.
> > +flash-max-microamp: Maximum flash current in microamperes. Has to be
> > + in the range between [200000, 500000] and
> > + divisible by 20000.
> > +led-max-microamp: Maximum torch (assist) current in microamperes. The
> > + value must be in the range between [20000, 160000] and
> > + divisible by 20000.
> > +ams,input-max-microamp: Maximum flash controller input current. The
> > + value must be in the range [1250000, 2000000]
> > + and divisible by 50000.
> > +
> > +
> > +Required properties of the "indicator" child node
> > +=================================================
> > +
> > +led-max-microamp: Maximum indicator current. The allowed values are
> > + 2500, 5000, 7500 and 10000.
>
> Most LED bindings mention also optional label property in the form:
>
> - label : See Documentation/devicetree/bindings/leds/common.txt
>
> > +
> > +Example
> > +=======
> > +
> > + as3645a: flash@30 {
> > + reg = <0x30>;
> > + compatible = "ams,as3645a";
> > + flash {
>
> label = "as3645a:flash";
>
> > + flash-timeout-us = <150000>;
> > + flash-max-microamp = <320000>;
> > + led-max-microamp = <60000>;
> > + ams,input-max-microamp = <1750000>;
> > + };
> > + indicator {
>
> label = "as3645a:indicator";
>
> > + led-max-microamp = <10000>;
> > + };
> > + };
> >
I'll make the above fixes for v2 (and add flash child node label property).
--
Regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
