Re: [PATCH v3 0/7] Add rk3328 pwm support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Thierry,

For the PWM patches, whether we let the first patch land in, that is PWM APB and function clocks are different in rk3328 and rv1108 SOCs. If the first patch was merged before 4.14, it will guarantee that the PWM is working, and the lock function you might review it later.

在 2017/8/8 23:38, David Wu 写道:
There are two features of rk3328 pwm module.
  - PWM APB and function clocks are different.
  - Add pwm atomic hardware update

David Wu (7):
   pwm: rockchip: Add APB and function both clocks support
   pwm: rockchip: Remove the judge from return value of pwm_config
   pwm: rockchip: Use pwm_apply instead of the pwm_enable
   pwm: rockchip: Move the configuration of polarity from
     rockchip_pwm_set_enable() to rockchip_pwm_config()
   pwm: rockchip: Use same pwm ops for each IP
   pwm: rockchip: Add rk3328 pwm support
   arm64: dts: rockchip: Add pwm nodes for rk3328

  .../devicetree/bindings/pwm/pwm-rockchip.txt       |   8 +-
  arch/arm64/boot/dts/rockchip/rk3328.dtsi           |  45 ++++
  drivers/pwm/pwm-rockchip.c                         | 281 +++++++++++----------
  3 files changed, 199 insertions(+), 135 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux