On Mon, Jul 17, 2017 at 02:25:38PM -0500, Christopher Bostic wrote:
> Describe device tree optional properties:
>
> * aspeed,reset-type = "cpu|soc|system|none"
> One of three different, mutually exclusive, values
>
> "cpu" : ARM CPU reset on signal
> "soc" : 'System on chip' reset
> "system" : Full system reset
>
> The value can also be set to "none" which indicates that no
> reset of any kind is to be done via this watchdog. This assumes
> another watchdog on the chip is to take care of resets.
>
> * aspeed,external-signal - Generate external signal (WDT1 and WDT2 only)
> * aspeed,alt-boot - Boot from alternate block on signal
>
> Signed-off-by: Christopher Bostic <cbostic@xxxxxxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> v5 - Removed aspeed,interrupt property - no plans at this point to
> need this functionality in the driver.
> v4 - Add aspeed-reset-type and assign one of four values,
> cpu, soc, system, none.
> v3 - Invert soc and sys reset to 'no' to preserve backwards
> compatibility. SOC and SYS reset will be set by default
> without any optional parameters set
> v2 - Add 'aspeed,' prefix to all optional properties
> - Add arm-reset, soc-reset, interrupt, alt-boot properties
> ---
> .../devicetree/bindings/watchdog/aspeed-wdt.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> index c5e74d7..2b34ce9 100644
> --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> @@ -8,9 +8,41 @@ Required properties:
> - reg: physical base address of the controller and length of memory mapped
> region
>
> +Optional properties:
> +
> + - aspeed,reset-type = "cpu|soc|system|none"
> +
> + Reset behavior - Whenever a timeout occurs the watchdog can be programmed
> + to generate one of three different, mutually exclusive, types of resets.
> +
> + Type "none" can be specified to indicate that no resets are to be done.
> + This is useful in situations where another watchdog engine on chip is
> + to perform the reset.
> +
> + If 'aspeed,reset-type=' is not specfied the default is to enable system
> + reset.
> +
> + Reset types:
> +
> + - cpu: Reset CPU on watchdog timeout
> +
> + - soc: Reset 'System on Chip' on watchdog timeout
> +
> + - system: Reset system on watchdog timeout
> +
> + - none: No reset is performed on timeout. Assumes another watchdog
> + engine is responsible for this.
> +
> + - aspeed,external-signal: If property is present then signal is sent to
> + external reset counter (only WDT1 and WDT2). If not
> + specified no external signal is sent.
> + - aspeed,alt-boot: If property is present then boot from alternate block.
> +
> Example:
>
> wdt1: watchdog@1e785000 {
> compatible = "aspeed,ast2400-wdt";
> reg = <0x1e785000 0x1c>;
> + aspeed,reset-type = "system";
> + aspeed,external-signal;
> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
