Allow each audio port to select which clock (if any) it wants to use.
Signed-off-by: Lori Hikichi <lori.hikichi@xxxxxxxxxxxx>
---
.../bindings/sound/brcm,cygnus-audio.txt | 70 ++++++++++++++--------
1 file changed, 45 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
index b139e66..2ef2f2c 100644
--- a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
+++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
@@ -9,19 +9,28 @@ Required properties:
Valid names are "aud" and "i2s_in". "aud" contains a
set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
a set of I2S_IN registers.
- - clocks: PLL and leaf clocks used by audio ports
- - assigned-clocks: PLL and leaf clocks
- - assigned-clock-parents: parent clocks of the assigned clocks
- (usually the PLL)
- - assigned-clock-rates: List of clock frequencies of the
- assigned clocks
- - clock-names: names of 3 leaf clocks used by audio ports
- Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
- interrupts: audio DMA interrupt number
+Optional properties:
+ - assigned-clocks: only valid choice is audiopll
+ - assigned-clock-rates: clock frequency for audiopll
+If none of the ports need an internal master clock then there no need to
+initialize the pll clock.
+
+
SSP Subnode properties:
-- reg: The index of ssp port interface to use
- Valid value are 0, 1, 2, or 3 (for spdif)
+Required:
+ - reg: The index of ssp port interface to use
+ Valid value are 0, 1, 2, or 3 (for spdif)
+Optional:
+ - clocks: clock used by audio port
+ one of the audiopll outputs (see brcm,iproc-clocks.txt).
+ - clock-names: Must be "ssp_clk"
+ - brcm,ssp-clk-mux = Needed if a clock is named and used. This value is
+ used to program the mux within the audio driver which selects
+ the incoming clock. Here is the mapping.
+ audio_pll output 0 = 0, output 1 = 1, and output 2 = 2
+
Example:
cygnus_audio: audio@180ae000 {
@@ -30,38 +39,49 @@ Example:
#size-cells = <0>;
reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
reg-names = "aud", "i2s_in";
- clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
- <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
- <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
- assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>,
- <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
- <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
- <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
- assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>;
- assigned-clock-rates = <1769470191>,
- <0>,
- <0>,
- <0>;
- clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
+
+ assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>;
+ assigned-clock-rates = <1376255989>;
+
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
ssp0: ssp_port@0 {
reg = <0>;
+
+ clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>;
+ clock-names = "ssp_clk";
+ brcm,ssp-clk-mux = <0>;
+
status = "okay";
};
ssp1: ssp_port@1 {
reg = <1>;
- status = "disabled";
+
+ clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>;
+ clock-names = "ssp_clk";
+ brcm,ssp-clk-mux = <1>;
+
+ status = "okay";
};
ssp2: ssp_port@2 {
reg = <2>;
- status = "disabled";
+
+ clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
+ clock-names = "ssp_clk";
+ brcm,ssp-clk-mux = <2>;
+
+ status = "okay";
};
spdif: spdif_port@3 {
reg = <3>;
+
+ clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
+ clock-names = "ssp_clk";
+ brcm,ssp-clk-mux = <2>;
+
status = "disabled";
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
