dra76-evm is a board based on TI's dra76 processor targeting for infotainment systems. Adding support for this platform. dra76-evm and dra7-evm has a similar layout except with few differences. So create a dra7-evm-common.dtsi with similarities on dra76-evm and dra7-evm. Include this common dtsi in both dra7-evm.dts and dra76-evm.dts Signed-off-by: Keerthy <j-keerthy@xxxxxx> Signed-off-by: Vignesh R <vigneshr@xxxxxx> Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> --- .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/dra7-evm-common.dtsi | 258 +++++++++++++ arch/arm/boot/dts/dra7-evm.dts | 248 +----------- arch/arm/boot/dts/dra76-evm.dts | 423 +++++++++++++++++++++ 5 files changed, 687 insertions(+), 248 deletions(-) create mode 100644 arch/arm/boot/dts/dra7-evm-common.dtsi create mode 100644 arch/arm/boot/dts/dra76-evm.dts diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 9c6bebe43449..68d6e60d8d17 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -187,6 +187,9 @@ Boards: - AM5718 IDK compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7" +- DRA762 EVM: Software Development Board for DRA762 + compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4b17f35dc9a7..d563d91a18e3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -657,7 +657,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ - dra71-evm.dtb + dra71-evm.dtb \ + dra76-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-kuroboxpro.dtb \ orion5x-lacie-d2-network.dtb \ diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi new file mode 100644 index 000000000000..343e95f9a001 --- /dev/null +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -0,0 +1,258 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; + + leds { + compatible = "gpio-leds"; + led0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = <BTN_0>; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = <BTN_1>; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; +}; + +&mcspi1 { + status = "okay"; +}; + +&mcspi2 { + status = "okay"; +}; + +&uart1 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + spi-max-frequency = <76800000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <76800000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&usb1 { + dr_mode = "otg"; + extcon = <&extcon_usb1>; +}; + +&usb2 { + dr_mode = "host"; +}; + +&atl { + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index f47fc4daf062..c3009bda62e3 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -8,9 +8,7 @@ /dts-v1/; #include "dra74x.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/ti-dra7-atl.h> -#include <dt-bindings/input/input.h> +#include "dra7-evm-common.dtsi" / { model = "TI DRA742"; @@ -21,10 +19,6 @@ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; - chosen { - stdout-path = &uart1; - }; - evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -51,11 +45,6 @@ regulator-max-microvolt = <1800000>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; - }; - extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; @@ -73,85 +62,6 @@ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; - sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "DRA7xx-EVM"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line Out", - "Microphone", "Mic Jack", - "Line", "Line In"; - simple-audio-card,routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC3L", "Mic Jack", - "MIC3R", "Mic Jack", - "Mic Jack", "Mic Bias", - "LINE1L", "Line In", - "LINE1R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - sound0_master: simple-audio-card,cpu { - sound-dai = <&mcasp3>; - system-clock-frequency = <5644800>; - }; - - simple-audio-card,codec { - sound-dai = <&tlv320aic3106>; - clocks = <&atl_clkin2_ck>; - }; - }; - - leds { - compatible = "gpio-leds"; - led0 { - label = "dra7:usr1"; - gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led1 { - label = "dra7:usr2"; - gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led2 { - label = "dra7:usr3"; - gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "dra7:usr4"; - gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - USER1 { - label = "btnUser1"; - linux,code = <BTN_0>; - gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; - }; - - USER2 { - label = "btnUser2"; - linux,code = <BTN_1>; - gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; - }; - }; }; &dra7_pmx_core { @@ -406,33 +316,6 @@ }; }; -&i2c3 { - status = "okay"; - clock-frequency = <400000>; -}; - -&mcspi1 { - status = "okay"; -}; - -&mcspi2 { - status = "okay"; -}; - -&uart1 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3e0>; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - &mmc1 { status = "okay"; pinctrl-names = "default"; @@ -459,84 +342,10 @@ cpu0-supply = <&smps123_reg>; }; -&qspi { - status = "okay"; - - spi-max-frequency = <76800000>; - m25p80@0 { - compatible = "s25fl256s1"; - spi-max-frequency = <76800000>; - reg = <0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - #address-cells = <1>; - #size-cells = <1>; - - /* MTD partition table. - * The ROM checks the first four physical blocks - * for a valid file to boot and the flash here is - * 64KiB block size. - */ - partition@0 { - label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; - }; - partition@1 { - label = "QSPI.SPL.backup1"; - reg = <0x00010000 0x00010000>; - }; - partition@2 { - label = "QSPI.SPL.backup2"; - reg = <0x00020000 0x00010000>; - }; - partition@3 { - label = "QSPI.SPL.backup3"; - reg = <0x00030000 0x00010000>; - }; - partition@4 { - label = "QSPI.u-boot"; - reg = <0x00040000 0x00100000>; - }; - partition@5 { - label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00080000>; - }; - partition@6 { - label = "QSPI.u-boot-env"; - reg = <0x001c0000 0x00010000>; - }; - partition@7 { - label = "QSPI.u-boot-env.backup1"; - reg = <0x001d0000 0x0010000>; - }; - partition@8 { - label = "QSPI.kernel"; - reg = <0x001e0000 0x0800000>; - }; - partition@9 { - label = "QSPI.file-system"; - reg = <0x009e0000 0x01620000>; - }; - }; -}; - -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; -&usb1 { - dr_mode = "otg"; - extcon = <&extcon_usb1>; -}; - -&usb2 { - dr_mode = "host"; -}; - &elm { status = "okay"; }; @@ -665,58 +474,3 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; - -&atl { - assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_gfclk_mux>, - <&dpll_abe_ck>, - <&dpll_abe_m2x2_ck>, - <&atl_clkin2_ck>; - assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; - assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; - - status = "okay"; - - atl2 { - bws = <DRA7_ATL_WS_MCASP2_FSX>; - aws = <DRA7_ATL_WS_MCASP3_FSX>; - }; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&atl_clkin2_ck>; - - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializer */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; -}; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts new file mode 100644 index 000000000000..b024a65c6e27 --- /dev/null +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -0,0 +1,423 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra76x.dtsi" +#include "dra7-evm-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "TI DRA762 EVM"; + compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + vsys_12v0: fixedregulator-vsys12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "vsys_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of Cntlr B of TPS43351-Q1 on dra76-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vsys_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vio_3v3: fixedregulator-vio_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + vio_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vio_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vio_3v3>; + enable-active-high; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + }; + + vio_1v8: fixedregulator-vio_1v8 { + compatible = "regulator-fixed"; + regulator-name = "vio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps5_reg>; + }; + + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&vio_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + ti,system-power-controller; + interrupt-controller; + #interrupt-cells = <2>; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + smps12-in-supply = <&vsys_3v3>; + smps3-in-supply = <&vsys_3v3>; + smps4-in-supply = <&vsys_3v3>; + smps5-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + ldo2-in-supply = <&vsys_3v3>; + ldo3-in-supply = <&vsys_5v0>; + ldo4-in-supply = <&vsys_5v0>; + ldo5-in-supply = <&vsys_3v3>; + + tps65917_regulators: regulators { + smps12_reg: smps12 { + /* VDD_DSPEVE */ + regulator-name = "smps12"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_CORE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDD_IVA */ + regulator-name = "smps4"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDDS1V8 */ + regulator-name = "smps5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> VDA_PHY1_1V8 */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> VDA_PHY2_1V8 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-bypass; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + /* VDA_USB_3V3 */ + regulator-name = "ldo3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDD_SDIO_DV */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; + }; + + lp87565: lp87565@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + + buck10-in-supply =<&vsys_3v3>; + buck23-in-supply =<&vsys_3v3>; + + regulators: regulators { + buck10_reg: buck10 { + /*VDD_MPU*/ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU*/ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + pcf_lcd: pcf8757@20 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + + pcf_gpio_21: pcf8757@21 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcf_hdmi: pcf8575@26 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; + + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vio_3v3>; + IOVDD-supply = <&vio_3v3>; + DRVDD-supply = <&vio_3v3>; + DVDD-supply = <&aic_dvdd>; + }; +}; + +&cpu0 { + vdd-supply = <&buck10_reg>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vio_3v3_sd>; + vmmc_aux-supply = <&ldo4_reg>; + bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is always hardwired. + */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vio_1v8>; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; +}; + +/* No RTC on this device */ +&rtc { + status = "disabled"; +}; + +&mac { + status = "okay"; + + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + dp83867_0: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; + + dp83867_1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldo3_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo3_reg>; +}; + +&qspi { + spi-max-frequency = <96000000>; + m25p80@0 { + spi-max-frequency = <96000000>; + }; +}; -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
