On Fri, Aug 11, 2017 at 04:11:13PM +0800, Chen-Yu Tsai wrote: > On Fri, Aug 11, 2017 at 4:05 PM, Corentin Labbe > <clabbe.montjoie@xxxxxxxxx> wrote: > > On Fri, Aug 11, 2017 at 10:42:51AM +0800, Chen-Yu Tsai wrote: > >> Hi, > >> > >> On Thu, Aug 10, 2017 at 4:51 PM, Corentin Labbe > >> <clabbe.montjoie@xxxxxxxxx> wrote: > >> > This patch add the new phy-is-integrated property to the internal PHY > >> > node. > >> > > >> > Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx> > >> > --- > >> > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 1 + > >> > 1 file changed, 1 insertion(+) > >> > > >> > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > >> > index 4b599b5d26f6..54fc24e4c569 100644 > >> > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi > >> > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > >> > @@ -425,6 +425,7 @@ > >> > reg = <1>; > >> > clocks = <&ccu CLK_BUS_EPHY>; > >> > resets = <&ccu RST_BUS_EPHY>; > >> > + phy-is-integrated; > >> > >> You also need to "delete" this property at the board level for > >> any board that has the external PHY at address <1>. Otherwise > >> they will stop working. This is due to the internal and external > >> PHYs having the same path and node name in the device tree, so > >> they are effectively the same node. > >> > >> ChenYu > >> > > > > They have not the same name, ext_rgmii_phy vs int_mii_phy. > > That is just the label. The label plays no part in device tree merging. The path > > /soc/ethernet@1c30000/mdio/ethernet-phy@1 > > is the same. You can look under > > /proc/device-tree/soc/ethernet@1c30000/mdio > > on the OrangePI Plus 2E or any other H3 board that uses an > external PHY at address 1. > > ChenYu Since we get the phy node by phy-handle and not by path, I think all should be good. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
