To make integrated PHY work, need to configure the PHY clock, PHY cru reset and related registers. Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx> --- change in v4: - PHY is internal or not base on the phy-is-internal property via phy node. changes in v5: - Use phy-is-integrated property via PHY node. - Get the PHY clock and reset control from PHY node of device tree. - Rename internal to integrated. drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 99 ++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index a8e8fd5..9019917 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -41,6 +41,7 @@ struct rk_gmac_ops { void (*set_to_rmii)(struct rk_priv_data *bsp_priv); void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed); void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed); + void (*integrated_phy_powerup)(struct rk_priv_data *bsp_priv); }; struct rk_priv_data { @@ -52,6 +53,7 @@ struct rk_priv_data { bool clk_enabled; bool clock_input; + bool integrated_phy; struct clk *clk_mac; struct clk *gmac_clkin; @@ -61,6 +63,9 @@ struct rk_priv_data { struct clk *clk_mac_refout; struct clk *aclk_mac; struct clk *pclk_mac; + struct clk *clk_phy; + + struct reset_control *phy_reset; int tx_delay; int rx_delay; @@ -750,9 +755,55 @@ static void rk3399_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed) .set_rmii_speed = rk3399_set_rmii_speed, }; -static int gmac_clk_init(struct rk_priv_data *bsp_priv) +#define RK_GRF_MACPHY_CON0 0xb00 +#define RK_GRF_MACPHY_CON1 0xb04 +#define RK_GRF_MACPHY_CON2 0xb08 +#define RK_GRF_MACPHY_CON3 0xb0c + +#define RK_MACPHY_ENABLE GRF_BIT(0) +#define RK_MACPHY_DISABLE GRF_CLR_BIT(0) +#define RK_MACPHY_CFG_CLK_50M GRF_BIT(14) +#define RK_GMAC2PHY_RMII_MODE (GRF_BIT(6) | GRF_CLR_BIT(7)) +#define RK_GRF_CON2_MACPHY_ID HIWORD_UPDATE(0x1234, 0xffff, 0) +#define RK_GRF_CON3_MACPHY_ID HIWORD_UPDATE(0x35, 0x3f, 0) + +static void rk_gmac_integrated_phy_powerup(struct rk_priv_data *priv) +{ + if (priv->ops->integrated_phy_powerup) + priv->ops->integrated_phy_powerup(priv); + + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_CFG_CLK_50M); + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_GMAC2PHY_RMII_MODE); + + regmap_write(priv->grf, RK_GRF_MACPHY_CON2, RK_GRF_CON2_MACPHY_ID); + regmap_write(priv->grf, RK_GRF_MACPHY_CON3, RK_GRF_CON3_MACPHY_ID); + + if (priv->phy_reset) { + /* PHY needs to be disabled before trying to reset it */ + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE); + if (priv->phy_reset) + reset_control_assert(priv->phy_reset); + usleep_range(10, 20); + if (priv->phy_reset) + reset_control_deassert(priv->phy_reset); + usleep_range(10, 20); + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_ENABLE); + msleep(30); + } +} + +static void rk_gmac_integrated_phy_powerdown(struct rk_priv_data *priv) { + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE); + if (priv->phy_reset) + reset_control_assert(priv->phy_reset); +} + +static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat) +{ + struct rk_priv_data *bsp_priv = plat->bsp_priv; struct device *dev = &bsp_priv->pdev->dev; + int ret; bsp_priv->clk_enabled = false; @@ -803,6 +854,16 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv) clk_set_rate(bsp_priv->clk_mac, 50000000); } + if (plat->phy_node && bsp_priv->integrated_phy) { + bsp_priv->clk_phy = of_clk_get(plat->phy_node, 0); + if (IS_ERR(bsp_priv->clk_phy)) { + ret = PTR_ERR(bsp_priv->clk_phy); + dev_err(dev, "Cannot get PHY clock: %d\n", ret); + return -EINVAL; + } + clk_set_rate(bsp_priv->clk_phy, 50000000); + } + return 0; } @@ -826,6 +887,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable) bsp_priv->clk_mac_refout); } + if (!IS_ERR(bsp_priv->clk_phy)) + clk_prepare_enable(bsp_priv->clk_phy); + if (!IS_ERR(bsp_priv->aclk_mac)) clk_prepare_enable(bsp_priv->aclk_mac); @@ -858,6 +922,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable) bsp_priv->clk_mac_refout); } + if (!IS_ERR(bsp_priv->clk_phy)) + clk_disable_unprepare(bsp_priv->clk_phy); + if (!IS_ERR(bsp_priv->aclk_mac)) clk_disable_unprepare(bsp_priv->aclk_mac); @@ -902,6 +969,7 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable) } static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev, + struct plat_stmmacenet_data *plat, const struct rk_gmac_ops *ops) { struct rk_priv_data *bsp_priv; @@ -964,9 +1032,22 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev, bsp_priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); - bsp_priv->pdev = pdev; - gmac_clk_init(bsp_priv); + if (plat->phy_node) { + bsp_priv->integrated_phy = of_property_read_bool(plat->phy_node, + "phy-is-integrated"); + if (bsp_priv->integrated_phy) { + bsp_priv->phy_reset = of_reset_control_get(plat->phy_node, NULL); + if (IS_ERR(bsp_priv->phy_reset)) { + dev_err(&pdev->dev, "No PHY reset control found.\n"); + bsp_priv->phy_reset = NULL; + } + } + } + dev_info(dev, "integrated PHY? (%s).\n", + bsp_priv->integrated_phy ? "yes" : "no"); + + bsp_priv->pdev = pdev; return bsp_priv; } @@ -1014,6 +1095,9 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv) pm_runtime_enable(dev); pm_runtime_get_sync(dev); + if (bsp_priv->integrated_phy) + rk_gmac_integrated_phy_powerup(bsp_priv); + return 0; } @@ -1021,6 +1105,9 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac) { struct device *dev = &gmac->pdev->dev; + if (gmac->integrated_phy) + rk_gmac_integrated_phy_powerdown(gmac); + pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -1072,12 +1159,16 @@ static int rk_gmac_probe(struct platform_device *pdev) plat_dat->has_gmac = true; plat_dat->fix_mac_speed = rk_fix_speed; - plat_dat->bsp_priv = rk_gmac_setup(pdev, data); + plat_dat->bsp_priv = rk_gmac_setup(pdev, plat_dat, data); if (IS_ERR(plat_dat->bsp_priv)) { ret = PTR_ERR(plat_dat->bsp_priv); goto err_remove_config_dt; } + ret = rk_gmac_clk_init(plat_dat); + if (ret) + return ret; + ret = rk_gmac_powerup(plat_dat->bsp_priv); if (ret) goto err_remove_config_dt; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html