[PATCH v4 1/7] PCI: mediatek: Using readl_poll_timeout to wait Gen2 training

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>

Wait Gen2 training by using readl_poll_timeout() calls, and simplify
the hardware assert logical by merge it into the new interface
mtk_pcie_startup_port.

Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
---
 drivers/pci/host/pcie-mediatek.c | 52 +++++++++++++++++-----------------------
 1 file changed, 22 insertions(+), 30 deletions(-)

diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
index 9c9f89b..f4e4226 100644
--- a/drivers/pci/host/pcie-mediatek.c
+++ b/drivers/pci/host/pcie-mediatek.c
@@ -16,6 +16,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -113,11 +114,6 @@ struct mtk_pcie {
 	struct list_head ports;
 };
 
-static inline bool mtk_pcie_link_up(struct mtk_pcie_port *port)
-{
-	return !!(readl(port->base + PCIE_LINK_STATUS) & PCIE_PORT_LINKUP);
-}
-
 static void mtk_pcie_subsys_powerdown(struct mtk_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
@@ -171,12 +167,30 @@ static struct pci_ops mtk_pcie_ops = {
 	.write = pci_generic_config_write,
 };
 
-static void mtk_pcie_configure_rc(struct mtk_pcie_port *port)
+static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
 {
 	struct mtk_pcie *pcie = port->pcie;
 	u32 func = PCI_FUNC(port->index << 3);
 	u32 slot = PCI_SLOT(port->index << 3);
 	u32 val;
+	int err;
+
+	/* assert port PERST_N */
+	val = readl(pcie->base + PCIE_SYS_CFG);
+	val |= PCIE_PORT_PERST(port->index);
+	writel(val, pcie->base + PCIE_SYS_CFG);
+
+	/* de-assert port PERST_N */
+	val = readl(pcie->base + PCIE_SYS_CFG);
+	val &= ~PCIE_PORT_PERST(port->index);
+	writel(val, pcie->base + PCIE_SYS_CFG);
+
+	/* 100ms timeout value should be enough for Gen1/2 training */
+	err = readl_poll_timeout(port->base + PCIE_LINK_STATUS, val,
+				 !!(val & PCIE_PORT_LINKUP), 20,
+				 100 * USEC_PER_MSEC);
+	if (err)
+		return -ETIMEDOUT;
 
 	/* enable interrupt */
 	val = readl(pcie->base + PCIE_INT_ENABLE);
@@ -209,25 +223,8 @@ static void mtk_pcie_configure_rc(struct mtk_pcie_port *port)
 	writel(PCIE_CONF_ADDR(PCIE_FTS_NUM, func, slot, 0),
 	       pcie->base + PCIE_CFG_ADDR);
 	writel(val, pcie->base + PCIE_CFG_DATA);
-}
 
-static void mtk_pcie_assert_ports(struct mtk_pcie_port *port)
-{
-	struct mtk_pcie *pcie = port->pcie;
-	u32 val;
-
-	/* assert port PERST_N */
-	val = readl(pcie->base + PCIE_SYS_CFG);
-	val |= PCIE_PORT_PERST(port->index);
-	writel(val, pcie->base + PCIE_SYS_CFG);
-
-	/* de-assert port PERST_N */
-	val = readl(pcie->base + PCIE_SYS_CFG);
-	val &= ~PCIE_PORT_PERST(port->index);
-	writel(val, pcie->base + PCIE_SYS_CFG);
-
-	/* PCIe v2.0 need at least 100ms delay to train from Gen1 to Gen2 */
-	msleep(100);
+	return 0;
 }
 
 static void mtk_pcie_enable_ports(struct mtk_pcie_port *port)
@@ -250,13 +247,8 @@ static void mtk_pcie_enable_ports(struct mtk_pcie_port *port)
 		goto err_phy_on;
 	}
 
-	mtk_pcie_assert_ports(port);
-
-	/* if link up, then setup root port configuration space */
-	if (mtk_pcie_link_up(port)) {
-		mtk_pcie_configure_rc(port);
+	if (!mtk_pcie_startup_port(port))
 		return;
-	}
 
 	dev_info(dev, "Port%d link down\n", port->index);
 
-- 
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux