On Mon, Aug 7, 2017 at 5:39 AM, Loic Poulain <loic.poulain@xxxxxxxxx> wrote:
> Add BCM43438 as a slave device of uart0 (pl011/ttyAMA0).
> This allows to automatically insert the bcm43438 to the bluetooth
> subsystem instead of relying on userspace helpers (hciattach).
>
> Overwrite bootargs to use 8250 aux uart (ttyS0) as console instead
> of pl011/ttyAMA0.
>
> Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxx>
> ---
> v2: dt-bindings as separate patch
> rebase on upcoming pi3 dts changes
> v3: changes in bcm serdev drivers:
> name refactoring and additional comments
> Add generic host_set_baudrate method
> Use agnostic device_property_read
>
> arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> index 20725ca..5abc1df 100644
> --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> @@ -8,6 +8,11 @@
> compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
> model = "Raspberry Pi 3 Model B";
>
> + chosen {
> + /* 8250 auxiliar UART instead of pl011 */
> + bootargs = "earlyprintk console=ttyS0,115200";
This is an unrelated change. "earlyprintk" is arm32 specific and only
works with a kernel built with a specific uart type and address. Also,
stdout-path property is preferred to set the default over "console".
> + };
> +
> memory {
> reg = <0 0x40000000>;
> };
> @@ -24,6 +29,11 @@
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
> status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + max-speed = <921600>;
> + };
> };
>
> /* uart1 is mapped to the pin header */
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
