On Mon, Jan 20, 2014 at 01:54:57PM +0100, Philipp Zabel wrote: > Am Montag, den 20.01.2014, 13:05 +0100 schrieb Markus Pargmann: > > Add DT support for this codec. The bindings differ a bit from the aic3x > > codec bindings, so I created a new binding documentation. > > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > Cc: Pawel Moll <pawel.moll@xxxxxxx> > > Cc: Mark Rutland <mark.rutland@xxxxxxx> > > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> > > Cc: devicetree@xxxxxxxxxxxxxxx > > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx> > > --- > > .../devicetree/bindings/sound/tlv320aic32x4.txt | 18 ++++++++++++++++ > > sound/soc/codecs/tlv320aic32x4.c | 25 ++++++++++++++++++++++ > > 2 files changed, 43 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic32x4.txt > > > > diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt > > new file mode 100644 > > index 0000000..cff06ea > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt > > @@ -0,0 +1,18 @@ > > +Texas Instruments - tlv320aic32x4 Codec module > > + > > +The tlv320aic32x4 serial control bus communicates through I2C protocols > > + > > +Required properties: > > + - compatible: Should be "ti,tlv320aic32x4" > > + - reg: I2C slave address > > + > > +Optional properties: > > + - gpio-reset: Reset-GPIO phandle with args as described in gpio/gpio.txt > > This should be "reset-gpios". Thanks, I will fix it for v3. Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
