>From schematic, the power, vol+/- key's active state is low,
so we need to set the gpio flag to active low.
Signed-off-by: Anson Huang <b20788@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 91e5dd4..f7689b4 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -58,21 +58,21 @@
power {
label = "Power Button";
- gpios = <&gpio3 29 0>;
+ gpios = <&gpio3 29 1>;
gpio-key,wakeup;
linux,code = <KEY_POWER>;
};
volume-up {
label = "Volume Up";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 1>;
gpio-key,wakeup;
linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
- gpios = <&gpio1 5 0>;
+ gpios = <&gpio1 5 1>;
gpio-key,wakeup;
linux,code = <KEY_VOLUMEDOWN>;
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
