On Mon, Jul 31, 2017 at 11:03 AM, Loic Poulain <loic.poulain@xxxxxxxxx> wrote:
> Add basic support for Broadcom serial slave devices.
> Probe the serial device, retrieve its maximum speed and
> register a new hci uart device.
>
> Tested/compatible with bcm43438 (RPi3).
>
> Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxx>
> ---
> drivers/bluetooth/hci_bcm.c | 82 ++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 78 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
> index 6b42372..f824738 100644
> --- a/drivers/bluetooth/hci_bcm.c
> +++ b/drivers/bluetooth/hci_bcm.c
> @@ -27,6 +27,7 @@
> #include <linux/firmware.h>
> #include <linux/module.h>
> #include <linux/acpi.h>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> #include <linux/gpio/consumer.h>
> @@ -34,6 +35,7 @@
> #include <linux/interrupt.h>
> #include <linux/dmi.h>
> #include <linux/pm_runtime.h>
> +#include <linux/serdev.h>
>
> #include <net/bluetooth/bluetooth.h>
> #include <net/bluetooth/hci_core.h>
> @@ -46,6 +48,7 @@
>
> #define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */
>
> +/* platform device driver resources */
> struct bcm_device {
> struct list_head list;
>
> @@ -68,6 +71,12 @@ struct bcm_device {
> #endif
> };
>
> +/* serdev driver resources */
> +struct bcm_bt_device {
> + struct hci_uart hu;
> +};
> +
> +/* generic bcm uart resources */
> struct bcm_data {
> struct sk_buff *rx_skb;
> struct sk_buff_head txq;
> @@ -289,6 +298,11 @@ static int bcm_open(struct hci_uart *hu)
>
> hu->priv = bcm;
>
> + if (hu->serdev) {
> + serdev_device_open(hu->serdev);
> + goto out;
> + }
> +
> if (!hu->tty->dev)
> goto out;
>
> @@ -323,6 +337,9 @@ static int bcm_close(struct hci_uart *hu)
>
> bt_dev_dbg(hu->hdev, "hu %p", hu);
>
> + if (hu->serdev)
> + serdev_device_close(hu->serdev);
> +
> /* Protect bcm->dev against removal of the device or driver */
> mutex_lock(&bcm_device_lock);
> if (bcm_device_exists(bdev)) {
> @@ -397,8 +414,12 @@ static int bcm_setup(struct hci_uart *hu)
> else
> speed = 0;
>
> - if (speed)
> - hci_uart_set_baudrate(hu, speed);
> + if (speed) {
> + if (hu->serdev)
> + serdev_device_set_baudrate(hu->serdev, speed);
> + else
> + hci_uart_set_baudrate(hu, speed);
> + }
>
> /* Operational speed if any */
> if (hu->oper_speed)
> @@ -410,8 +431,12 @@ static int bcm_setup(struct hci_uart *hu)
>
> if (speed) {
> err = bcm_set_baudrate(hu, speed);
> - if (!err)
> - hci_uart_set_baudrate(hu, speed);
> + if (!err) {
> + if (hu->serdev)
> + serdev_device_set_baudrate(hu->serdev, speed);
> + else
> + hci_uart_set_baudrate(hu, speed);
> + }
> }
>
> finalize:
> @@ -903,9 +928,57 @@ static int bcm_remove(struct platform_device *pdev)
> },
> };
>
> +static int bcm_serdev_probe(struct serdev_device *serdev)
> +{
> + struct bcm_bt_device *bcmdev;
> + u32 speed;
> + int err;
> +
> + bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL);
> + if (!bcmdev)
> + return -ENOMEM;
> +
> + bcmdev->hu.serdev = serdev;
> + serdev_device_set_drvdata(serdev, bcmdev);
> +
> + err = of_property_read_u32(serdev->dev.of_node, "max-speed", &speed);
> + if (!err)
> + bcmdev->hu.oper_speed = speed;
> +
> + return hci_uart_register_device(&bcmdev->hu, &bcm_proto);
> +}
> +
> +static void bcm_serdev_remove(struct serdev_device *serdev)
> +{
> + struct bcm_bt_device *bcmdev = serdev_device_get_drvdata(serdev);
> +
> + hci_uart_unregister_device(&bcmdev->hu);
> +}
I'm seeing the following warning when building this with Fedora-26/gcc7:
drivers/bluetooth/hci_bcm.c: In function 'bcm_serdev_remove':
drivers/bluetooth/hci_bcm.c:953:2: error: implicit declaration of
function 'hci_uart_unregister_device'; did you mean
'hci_uart_register_device'? [-Werror=implicit-function-declaration]
hci_uart_unregister_device(&bcmdev->hu);
^~~~~~~~~~~~~~~~~~~~~~~~~~
hci_uart_register_device
cc1: some warnings being treated as errors
> +#ifdef CONFIG_OF
> +static const struct of_device_id bcm_bluetooth_of_match[] = {
> + { .compatible = "brcm,bcm43438-bt" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
> +#endif
> +
> +static struct serdev_device_driver bcm_serdev_driver = {
> + .probe = bcm_serdev_probe,
> + .remove = bcm_serdev_remove,
> + .driver = {
> + .name = "hci_uart_bcm",
> + .of_match_table = of_match_ptr(bcm_bluetooth_of_match),
> + },
> +};
> +
> int __init bcm_init(void)
> {
> + /* For now, we need to keep both platform device
> + * driver (ACPI generated) and serdev driver (DT).
> + */
> platform_driver_register(&bcm_driver);
> + serdev_device_driver_register(&bcm_serdev_driver);
>
> return hci_uart_register_proto(&bcm_proto);
> }
> @@ -913,6 +986,7 @@ int __init bcm_init(void)
> int __exit bcm_deinit(void)
> {
> platform_driver_unregister(&bcm_driver);
> + serdev_device_driver_unregister(&bcm_serdev_driver);
>
> return hci_uart_unregister_proto(&bcm_proto);
> }
> --
> 1.9.1
>
>
> _______________________________________________
> linux-rpi-kernel mailing list
> linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rpi-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
