This patch series move the SMP startup code of BCM2836 and BCM2837 to the right place. There was already a patch from Marc Zyngier [1], but it breaks SMP for RPI 3 on 32-bit (other cores stays offline). I based my patch series on Marc's patch with the following changes: * define enable-method and use it in the dts files * place SMP code into platsmp.c * rename bcm2836_smp_boot_secondary() to bcm2836_boot_secondary() * use of_find_compatible_node() instead of of_find_matching_node() This series requires the patch "ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm." [1] - https://patchwork.kernel.org/patch/9719845/ Stefan Wahren (3): dt-bindings: arm: add SMP enable-method for BCM2836 ARM: dts: bcm283x: Add 32-bit enable method for SMP irqchip: bcm2836: Move SMP startup code to arch/arm Documentation/devicetree/bindings/arm/cpus.txt | 1 + arch/arm/boot/dts/bcm2836.dtsi | 1 + arch/arm/boot/dts/bcm2837.dtsi | 1 + arch/arm/mach-bcm/Makefile | 3 + arch/arm/mach-bcm/platsmp.c | 35 ++++++++++++ drivers/irqchip/irq-bcm2836.c | 79 +------------------------- include/linux/irqchip/irq-bcm2836.h | 70 +++++++++++++++++++++++ 7 files changed, 113 insertions(+), 77 deletions(-) create mode 100644 include/linux/irqchip/irq-bcm2836.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
