Enable sdcard Ultra High Speed mode on the p20x. While the s905 should support sdr104, the pcb of the p200 does not and is limited to an sdcard clock rate of 100Mhz (SDR50) Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 58b32f272a0e..900a13cc24ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -217,6 +217,9 @@ bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; -- 2.9.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
