Hi David,
Thank you for the patch.
On Thursday 03 Aug 2017 17:33:47 David Lechner wrote:
> This adds a new binding for Sitronix ST7586 display panels.
>
> Using lego as the vendor prefix in the compatible string because the display
> panel I am working with is an integral part of the LEGO MINDSTORMS EV3.
>
> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> ---
> .../bindings/display/sitronix,st7586.txt | 26 +++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/sitronix,st7586.txt
>
> diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt
> b/Documentation/devicetree/bindings/display/sitronix,st7586.txt new file
> mode 100644
> index 0000000..dfb0b7b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
> @@ -0,0 +1,26 @@
> +Sitronix ST7586 display panel
> +
> +Required properties:
> +- compatible: "lego,ev3-lcd".
> +
> +The node for this driver must be a child node of a SPI controller, hence
> +all mandatory properties described in ../spi/spi-bus.txt must be specified.
> +
> +Optional properties:
> +- dc-gpios: D/C pin. The presence/absence of this GPIO determines
> + the panel interface operation mode (IF[3:1] pins):
> + - present: IF=011 4-wire 8-bit data serial interface
> + - absent: IF=010 3-wire 9-bit data serial interface
How does this work ? Do you have a single GPIO on your system connected to
IF[1], with IF[3:2] hardwired to 01 ?
> +- reset-gpios: Reset pin
> +- power-supply: A regulator node for the supply voltage.
> +- backlight: phandle of the backlight device attached to the panel
> +- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
Please use the OF graph DT bindings (a.k.a. ports) to describe the connection
between the panel and its source.
> +Example:
> + display@0{
> + compatible = "lego,ev3-lcd";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
> + };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
