On Fri, 2017-08-04 at 11:59 +0800, sean.wang@xxxxxxxxxxxx wrote:
> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
>
> The bananapi-r2 board has an SD-card controller and built-in
> EMMC storage so enables those devices in the devicetree. Also
> cleanup nodes in alphabetical order in the patch.
>
Hi, Matthias
could your help remove those words "Also cleanup nodes in alphabetical
order in the patch." when merging, i was forgetting to do it.
or prefer wanting me to resend it again?
Sean
> Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 37 +++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 9f3e6dd..444ed93 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -179,6 +179,32 @@
> status = "okay";
> };
>
> +&mmc0 {
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_pins_default>;
> + pinctrl-1 = <&mmc0_pins_uhs>;
> + status = "okay";
> + bus-width = <8>;
> + max-frequency = <50000000>;
> + cap-mmc-highspeed;
> + vmmc-supply = <&mt6323_vemc3v3_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> + non-removable;
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc1_pins_default>;
> + pinctrl-1 = <&mmc1_pins_uhs>;
> + status = "okay";
> + bus-width = <4>;
> + max-frequency = <50000000>;
> + cap-sd-highspeed;
> + cd-gpios = <&pio 261 0>;
> + vmmc-supply = <&mt6323_vmch_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> +};
> +
> &pio {
> cir_pins_a:cir@0 {
> pins_cir {
> @@ -314,6 +340,17 @@
> bias-pull-down;
> drive-strength = <MTK_DRIVE_4mA>;
> };
> +
> + pins_wp {
> + pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins_insert {
> + pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
> + bias-pull-up;
> + };
> };
>
> mmc1_pins_uhs: mmc1 {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
