Re: [PATCH v2 11/25] mtd: nand: qcom: support for NAND controller properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 4 Aug 2017 09:49:52 +0200
Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote:

> On Wed, 19 Jul 2017 17:17:59 +0530
> Abhishek Sahu <absahu@xxxxxxxxxxxxxx> wrote:
> 
> > Currently driver data is being assigned directly with ECC modes.
> > Now, the plan is to add more NAND controller versions, so
> > reorganized the current driver data assignment by creating NAND
> > controller properties structure.  This will contain all
> > properties specific to NAND controller.
> >   
> 
> Applied.

My bad, this one has not been applied.

> 
> Thanks,
> 
> Boris
> 
> > Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
> > ---
> >  drivers/mtd/nand/qcom_nandc.c | 23 +++++++++++++++++------
> >  1 file changed, 17 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
> > index 8f9e86c..3b0ae91 100644
> > --- a/drivers/mtd/nand/qcom_nandc.c
> > +++ b/drivers/mtd/nand/qcom_nandc.c
> > @@ -235,7 +235,7 @@ struct nandc_regs {
> >   *				writes. contains the register values to be
> >   *				written to controller
> >   * @cmd1/vld:			some fixed controller register values
> > - * @ecc_modes:			supported ECC modes by the current controller,
> > + * @props:			properties of current NAND controller IP,
> >   *				initialized via DT match data
> >   */
> >  struct qcom_nand_controller {
> > @@ -266,7 +266,7 @@ struct qcom_nand_controller {
> >  	struct nandc_regs *regs;
> >  
> >  	u32 cmd1, vld;
> > -	u32 ecc_modes;
> > +	const struct qcom_props *props;
> >  };
> >  
> >  /*
> > @@ -319,6 +319,15 @@ struct qcom_nand_host {
> >  	u32 clrreadstatus;
> >  };
> >  
> > +/*
> > + * This data type corresponds to the nand controller properties which varies
> > + * among different NAND controller IP's.
> > + * @ecc_modes - ecc mode for NAND
> > + */
> > +struct qcom_props {
> > +	u32 ecc_modes;
> > +};
> > +
> >  static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
> >  {
> >  	return container_of(chip, struct qcom_nand_host, chip);
> > @@ -1820,7 +1829,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
> >  		 * uses lesser bytes for ECC. If RS is used, the ECC bytes is
> >  		 * always 10 bytes
> >  		 */
> > -		if (nandc->ecc_modes & ECC_BCH_4BIT) {
> > +		if (nandc->props->ecc_modes & ECC_BCH_4BIT) {
> >  			/* BCH */
> >  			host->bch_enabled = true;
> >  			ecc_mode = 0;
> > @@ -2165,7 +2174,7 @@ static int qcom_nandc_probe(struct platform_device *pdev)
> >  		return -ENODEV;
> >  	}
> >  
> > -	nandc->ecc_modes = (unsigned long)dev_data;
> > +	nandc->props = dev_data;
> >  
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	nandc->base = devm_ioremap_resource(dev, res);
> > @@ -2234,7 +2243,9 @@ static int qcom_nandc_remove(struct platform_device *pdev)
> >  	return 0;
> >  }
> >  
> > -#define EBI2_NANDC_ECC_MODES	(ECC_RS_4BIT | ECC_BCH_8BIT)
> > +static const struct qcom_props ebi2_nandc_data = {
> > +	.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
> > +};
> >  
> >  /*
> >   * data will hold a struct pointer containing more differences once we support
> > @@ -2242,7 +2253,7 @@ static int qcom_nandc_remove(struct platform_device *pdev)
> >   */
> >  static const struct of_device_id qcom_nandc_of_match[] = {
> >  	{	.compatible = "qcom,ebi2-nandc",
> > -		.data = (void *)EBI2_NANDC_ECC_MODES,
> > +		.data = &ebi2_nandc_data,
> >  	},
> >  	{}
> >  };  
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux