Re: [PATCH v4 3/3] power: wm831x_power: Support USB charger current limit management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4 August 2017 at 03:16, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Jul 27, 2017 at 01:14:38PM +0800, Baolin Wang wrote:
>> Integrate with the newly added USB charger interface to limit the current
>> we draw from the USB input based on the input device configuration
>> identified by the USB stack, allowing us to charge more quickly from high
>> current inputs without drawing more current than specified from others.
>>
>> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
>> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>> Acked-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/mfd/wm831x.txt |    1 +
>>  drivers/power/supply/wm831x_power.c              |   72 ++++++++++++++++++++++
>>  2 files changed, 73 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
>> index 9f8b743..4e3bc07 100644
>> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt
>> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
>> @@ -31,6 +31,7 @@ Required properties:
>>      ../interrupt-controller/interrupts.txt
>>
>>  Optional sub-nodes:
>> +  - usb-phy : Contains a phandle to the USB PHY.
>
> Use the phy binding ("phys") instead.

OK. Will fix in next version. Thanks.

>
>>    - regulators : Contains sub-nodes for each of the regulators supplied by
>>      the device. The regulators are bound using their names listed below:
>>
>> diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
>> index 7082301..dff6473 100644
>> --- a/drivers/power/supply/wm831x_power.c
>> +++ b/drivers/power/supply/wm831x_power.c
>> @@ -13,6 +13,7 @@
>>  #include <linux/platform_device.h>
>>  #include <linux/power_supply.h>
>>  #include <linux/slab.h>
>> +#include <linux/usb/phy.h>
>>
>>  #include <linux/mfd/wm831x/core.h>
>>  #include <linux/mfd/wm831x/auxadc.h>
>> @@ -31,6 +32,8 @@ struct wm831x_power {
>>       char usb_name[20];
>>       char battery_name[20];
>>       bool have_battery;
>> +     struct usb_phy *usb_phy;
>> +     struct notifier_block usb_notify;
>>  };
>>
>>  static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
>> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
>>       POWER_SUPPLY_PROP_VOLTAGE_NOW,
>>  };
>>
>> +/* In milliamps */
>> +static const unsigned int wm831x_usb_limits[] = {
>> +     0,
>> +     2,
>> +     100,
>> +     500,
>> +     900,
>> +     1500,
>> +     1800,
>> +     550,
>> +};
>> +
>> +static int wm831x_usb_limit_change(struct notifier_block *nb,
>> +                                unsigned long limit, void *data)
>> +{
>> +     struct wm831x_power *wm831x_power = container_of(nb,
>> +                                                      struct wm831x_power,
>> +                                                      usb_notify);
>> +     unsigned int i, best;
>> +
>> +     /* Find the highest supported limit */
>> +     best = 0;
>> +     for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
>> +             if (limit >= wm831x_usb_limits[i] &&
>> +                 wm831x_usb_limits[best] < wm831x_usb_limits[i])
>> +                     best = i;
>> +     }
>> +
>> +     dev_dbg(wm831x_power->wm831x->dev,
>> +             "Limiting USB current to %umA", wm831x_usb_limits[best]);
>> +
>> +     wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
>> +                     WM831X_USB_ILIM_MASK, best);
>> +
>> +     return 0;
>> +}
>> +
>>  /*********************************************************************
>>   *           Battery properties
>>   *********************************************************************/
>> @@ -607,6 +647,33 @@ static int wm831x_power_probe(struct platform_device *pdev)
>>               }
>>       }
>>
>> +     power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
>> +     ret = PTR_ERR_OR_ZERO(power->usb_phy);
>> +
>> +     switch (ret) {
>> +     case 0:
>> +             power->usb_notify.notifier_call = wm831x_usb_limit_change;
>> +             ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
>> +             if (ret) {
>> +                     dev_err(&pdev->dev, "Failed to register notifier: %d\n",
>> +                             ret);
>> +                     goto err_bat_irq;
>> +             }
>> +             break;
>> +     case -EINVAL:
>> +     case -ENODEV:
>> +             /* ignore missing usb-phy, it's optional */
>> +             power->usb_phy = NULL;
>> +             ret = 0;
>> +             break;
>> +     default:
>> +             dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
>> +             /* fall-through */
>> +     case -EPROBE_DEFER:
>> +             goto err_bat_irq;
>> +             break;
>> +     }
>> +
>>       return ret;
>>
>>  err_bat_irq:
>> @@ -637,6 +704,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
>>       struct wm831x *wm831x = wm831x_power->wm831x;
>>       int irq, i;
>>
>> +     if (wm831x_power->usb_phy) {
>> +             usb_unregister_notifier(wm831x_power->usb_phy,
>> +                                     &wm831x_power->usb_notify);
>> +     }
>> +
>>       for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
>>               irq = wm831x_irq(wm831x,
>>                                platform_get_irq_byname(pdev,
>> --
>> 1.7.9.5
>>



-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux