On 08/03/2017 04:20 AM, Sergei Shtylyov wrote: > On 8/3/2017 3:51 AM, Franklin S Cooper Jr wrote: > >> Add information regarding fixed transceiver binding. This is especially >> important for MCAN since the IP allows CAN FD mode to run significantly >> faster than what most transceivers are capable of. >> >> Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx> >> --- >> Documentation/devicetree/bindings/net/can/m_can.txt | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt >> b/Documentation/devicetree/bindings/net/can/m_can.txt >> index 9e33177..0b62f47 100644 >> --- a/Documentation/devicetree/bindings/net/can/m_can.txt >> +++ b/Documentation/devicetree/bindings/net/can/m_can.txt >> @@ -43,6 +43,11 @@ Required properties: >> Please refer to 2.4.1 Message RAM Configuration in >> Bosch M_CAN user manual for details. >> +Optional properties: >> +- fixed-transceiver : Fixed-transceiver subnode describing maximum >> speed > > Subnode is not a property. Ok makes sense. Several bindings refer to fixed-link as an optional property. I thought there was some kind of weird reasoning to do so which I decided to follow. I'll update it to say "Optional subnode". > >> + that can be used for CAN/CAN-FD modes. See >> + >> Documentation/devicetree/bindings/net/can/fixed-transceiver.txt >> + for details. >> Example: >> SoC dtsi: >> m_can1: can@020e8000 { >> @@ -64,4 +69,8 @@ Board dts: >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_m_can1>; >> status = "enabled"; >> + >> + fixed-transceiver@0 { > > Same comments here as in previous patch. Will fix. > > [...] > > MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html