Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Rob Clark <robdclark@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Tested-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/iommu/qcom,iommu.txt | 121 +++++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
new file mode 100644
index 000000000000..b2641ceb2b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
@@ -0,0 +1,121 @@
+* QCOM IOMMU v1 Implementation
+
+Qualcomm "B" family devices which are not compatible with arm-smmu have
+a similar looking IOMMU but without access to the global register space,
+and optionally requiring additional configuration to route context irqs
+to non-secure vs secure interrupt line.
+
+** Required properties:
+
+- compatible : Should be one of:
+
+ "qcom,msm8916-iommu"
+
+ Followed by "qcom,msm-iommu-v1".
+
+- clock-names : Should be a pair of "iface" (required for IOMMUs
+ register group access) and "bus" (required for
+ the IOMMUs underlying bus access).
+
+- clocks : Phandles for respective clocks described by
+ clock-names.
+
+- #address-cells : must be 1.
+
+- #size-cells : must be 1.
+
+- #iommu-cells : Must be 1. Index identifies the context-bank #.
+
+- ranges : Base address and size of the iommu context banks.
+
+- qcom,iommu-secure-id : secure-id.
+
+- List of sub-nodes, one per translation context bank. Each sub-node
+ has the following required properties:
+
+ - compatible : Should be one of:
+ - "qcom,msm-iommu-v1-ns" : non-secure context bank
+ - "qcom,msm-iommu-v1-sec" : secure context bank
+ - reg : Base address and size of context bank within the iommu
+ - interrupts : The context fault irq.
+
+** Optional properties:
+
+- reg : Base address and size of the SMMU local base, should
+ be only specified if the iommu requires configuration
+ for routing of context bank irq's to secure vs non-
+ secure lines. (Ie. if the iommu contains secure
+ context banks)
+
+
+** Examples:
+
+ apps_iommu: iommu@1e20000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x1e20000 0x40000>;
+ reg = <0x1ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <17>;
+
+ // mdp_0:
+ iommu-ctx@4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // venus_ns:
+ iommu-ctx@5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpu_iommu: iommu@1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x1f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <18>;
+
+ // gfx3d_user:
+ iommu-ctx@1000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // gfx3d_priv:
+ iommu-ctx@2000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ ...
+
+ venus: video-codec@1d00000 {
+ ...
+ iommus = <&apps_iommu 5>;
+ };
+
+ mdp: mdp@1a01000 {
+ ...
+ iommus = <&apps_iommu 4>;
+ };
+
+ gpu@01c00000 {
+ ...
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+ };
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
