Hi all, 2017-08-03 18:32 GMT+08:00 Jacob Chen <jacob-chen@xxxxxxxxxx>: > Add support for the rk3399 sapphire SOM board. > This board works in a combination with the excavator main board. > > You can get more info from below link: > http://opensource.rock-chips.com/wiki_Excavator_sapphire_board > > Signed-off-by: Jacob Chen <jacob-chen@xxxxxxxxxx> > --- > arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 646 ++++++++++++++++++++++ > 1 file changed, 646 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi > new file mode 100644 > index 0000000..4c6b369 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi > @@ -0,0 +1,646 @@ > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include "dt-bindings/pwm/pwm.h" > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 25000 0>; > + brightness-levels = < > + 0 1 2 3 4 5 6 7 > + 8 9 10 11 12 13 14 15 > + 16 17 18 19 20 21 22 23 > + 24 25 26 27 28 29 30 31 > + 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 > + 48 49 50 51 52 53 54 55 > + 56 57 58 59 60 61 62 63 > + 64 65 66 67 68 69 70 71 > + 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 > + 88 89 90 91 92 93 94 95 > + 96 97 98 99 100 101 102 103 > + 104 105 106 107 108 109 110 111 > + 112 113 114 115 116 117 118 119 > + 120 121 122 123 124 125 126 127 > + 128 129 130 131 132 133 134 135 > + 136 137 138 139 140 141 142 143 > + 144 145 146 147 148 149 150 151 > + 152 153 154 155 156 157 158 159 > + 160 161 162 163 164 165 166 167 > + 168 169 170 171 172 173 174 175 > + 176 177 178 179 180 181 182 183 > + 184 185 186 187 188 189 190 191 > + 192 193 194 195 196 197 198 199 > + 200 201 202 203 204 205 206 207 > + 208 209 210 211 212 213 214 215 > + 216 217 218 219 220 221 222 223 > + 224 225 226 227 228 229 230 231 > + 232 233 234 235 236 237 238 239 > + 240 241 242 243 244 245 246 247 > + 248 249 250 251 252 253 254 255>; > + default-brightness-level = <200>; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + dc_12v: dc-12v { > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc_sys: vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + vin-supply = <&vcc_sys>; > + }; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc_lan>; > + phy-mode = "rgmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio1>; > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l &pmic_dvs2>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc_sys>; > + vcc2-supply = <&vcc_sys>; > + vcc3-supply = <&vcc_sys>; > + vcc4-supply = <&vcc_sys>; > + vcc6-supply = <&vcc_sys>; > + vcc7-supply = <&vcc_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc_sys>; > + vcc10-supply = <&vcc_sys>; > + vcc11-supply = <&vcc_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc1v8_pmu>; > + > + regulators { > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v0_tp: LDO_REG2 { > + regulator-name = "vcc3v0_tp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc1v8_pmu: LDO_REG3 { > + regulator-name = "vcc1v8_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: vcc_lan: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu_b"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + vin-supply = <&vcc_sys>; > + }; > +}; > + > +&i2c3 { > + i2c-scl-rising-time-ns = <450>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +&io_domains { > + status = "okay"; > + > + bt656-supply = <&vcc_3v0>; > + audio-supply = <&vcca1v8_codec>; > + sdmmc-supply = <&vcc_sdio>; > + gpio1830-supply = <&vcc_3v0>; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > + > +&pcie0 { > + assigned-clocks = <&cru SCLK_PCIEPHY_REF>; > + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; > + assigned-clock-rates = <100000000>; > + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; > + num-lanes = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_clkreqn>; > + status = "okay"; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pinctrl { > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = > + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + pmic_dvs2: pmic-dvs2 { > + rockchip,pins = > + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = > + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca1v8_s3>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + keep-power-in-suspend; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + non-removable; > + status = "okay"; > +}; > + > +&sdio0 { > + clock-frequency = <50000000>; > + clock-freq-min-max = <200000 50000000>; > + bus-width = <4>; > + disable-wp; > + cap-sd-highspeed; > + cap-sdio-irq; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + num-slots = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > + sd-uhs-sdr104; > + status = "okay"; > +}; > + > +&sdmmc { > + clock-frequency = <150000000>; > + clock-freq-min-max = <100000 150000000>; > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + disable-wp; > + num-slots = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > + vqmmc-supply = <&vcc_sdio>; > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + status = "okay"; > + dr_mode = "otg"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +}; > -- > 2.7.4 > http://imgur.com/a/6K0t8 I can have display in this board, but need some assigned clock-rate assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; assigned-clock-rates = <400000000>, <200000000>; assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; assigned-clock-rates = <400000000>, <200000000>; Is it a issue? Are there any pacthes in 4.14 will fix it? -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
