Hi Frank, Am Mittwoch, 2. August 2017, 15:53:09 CEST schrieb Frank Wang: > Add rockchip,otg_mux_irq_quirk property to support the otg-id/ > otg-bvalid/linestate irqs that are multiplexed to one irq in > otg-port on some special Rockchip SoCs (e.g RV1108). > > Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt > b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt index > ddf868a..d49572b 100644 > --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt > @@ -22,6 +22,8 @@ Optional properties: > register files". > - rockchip,companion_grf_quirk : when set driver will request > "rockchip,usbgrf" phandle as one companion-grf. > + - rockchip,otg_mux_irq_quirk: set if otg-id/otg-bvalid/linestate irqs > + are multiplexed to one irq in otg-port on some SoCs. > > Required nodes : a sub-node is required for each port the phy provides. > The sub-node name is used to identify host or otg port, > @@ -36,6 +38,9 @@ Required properties (port (child) node): > * "otg-id" : for the otg id interrupt. > * "otg-bvalid" : for the otg vbus interrupt. > * "linestate" : for the host/otg linestate interrupt. > + * "otg-mux" : otg-port interrupt, which multiplex otg-id/otg-bvalid/ > + linestate irqs to one irq. Should specify if > + rockchip,otg_mux_irq_quirk property is set. I'd think that should be auto-detectable in the driver without the quirk property above? I.e. check for the otg-mux interrupt first on probe and if can be found, you know that this is the case, otherwise look for the regular interrupts. Also I would write that down a bit differently, so that it doesn't confuse people. Something similar to: - interrupt-names : a list which should + Regular case: * "otg-id" : for the otg id interrupt. * "otg-bvalid" : for the otg vbus interrupt. * "linestate" : for the host/otg linestate interrupt. + Some socs use one interrupt with the obove muxed together, so for these + * "otg-mux" : otg-port interrupt, which multiplex otg-id/otg-bvalid/ + linestate irqs to one irq. Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
