Add initial device tree support for Variscite DART-SD410 Evalueation board. This board is also known as VAR-SD410CustomBoard. checkpatch.pl gives warnings for some lines that are over 80 characters, but I decided not to change them since similar lines in other dts files. Patch has been tested on 96Boards Dragonboard410c and Variscite SD410Customboard Both Linaro Linux 17.06 release https://discuss.96boards.org/t/linaro-linux-17-06-releases/2217 Signed-off-by: Leonid Segal <leonid.s@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/apq8016-var-dart-pmic-pins.dtsi | 53 +++ .../boot/dts/qcom/apq8016-var-dart-soc-pins.dtsi | 88 ++++ arch/arm64/boot/dts/qcom/apq8016-var-dart.dts | 21 + arch/arm64/boot/dts/qcom/apq8016-var-dart.dtsi | 525 +++++++++++++++++++++ 5 files changed, 688 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart-pmic-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart-soc-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart.dts create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart.dtsi -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
