On Sun, Jan 19, 2014 at 12:48:53AM +0100, Hans de Goede wrote: > Instead only provide platform_data through of_device_id, like the ahci-sunxi > driver does. It looks like the whole of ahci_imx.c (apart from the inclues) is enclosed in a big ifdef. You can avoid that by using this in the Makefile: > @@ -10,9 +10,8 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o > obj-$(CONFIG_SATA_SIL24) += sata_sil24.o > obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o > obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o > -obj-$(CONFIG_AHCI_IMX) += ahci_imx.o > > -ahci_plat-objs := ahci_platform.o ahci_sunxi.o > +ahci_plat-objs := ahci_platform.o ahci_imx.o ahci_sunxi.o ahci_plat-y := ahci_platform.o ahci_sunxi.o ahci_plat-$(CONFIG_AHCI_IMX) += ahci_imx.o -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was "up to 13.2Mbit". -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
