The gmac2phy controller of rk3328 is connected to internal phy
directly inside, add the node for the internal phy support.
Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 0be96ce..51c8c66 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -63,6 +63,8 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ ethernet0 = &gmac2io;
+ ethernet1 = &gmac2phy;
};
cpus {
@@ -424,6 +426,29 @@
status = "disabled";
};
+ gmac2phy: eth@ff550000 {
+ compatible = "rockchip,rk3328-gmac";
+ reg = <0x0 0xff550000 0x0 0x10000>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_MAC2PHY_SRC>, <&cru SCLK_MAC2PHY_RXTX>,
+ <&cru SCLK_MAC2PHY_RXTX>, <&cru SCLK_MAC2PHY_REF>,
+ <&cru ACLK_MAC2PHY>, <&cru PCLK_MAC2PHY>,
+ <&cru SCLK_MAC2PHY_OUT>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "aclk_mac", "pclk_mac",
+ "clk_macphy";
+ resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
+ reset-names = "stmmaceth", "mac-phy";
+ phy-mode = "rmii";
+ phy-is-internal;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fephyled_rxm1 &fephyled_linkm1>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ff811000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
